Results 11 to 17 of 17
Thread: Hole in Ballast Bag
-
04-10-2023, 05:36 PM #11
If still under warranty, submit a claim. They replaced mine, had a small pin hole and a fitting that had ripped out slightly
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
04-17-2023, 06:14 PM #12
Follow up to this. Do not waste your money on the $12 patch kit from Fat Sac. I didn’t even fill the bag and it has started to peel. Going to pull it off and try Flex Tape.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
04-17-2023, 07:46 PM #132021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
04-17-2023, 11:42 PM #14
-
04-18-2023, 11:53 AM #15
Thanks. I will give it a try! I guess I should have known. They are in the business of selling Fatsacs. Not repair kits….
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
04-18-2023, 05:31 PM #16
The Gorilla waterproof seal tape is really good stuff too.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
04-25-2023, 12:05 PM #17Member
- Join Date
- Oct 2018
- Posts
- 32
I used 3M 5200 to seal up a small leak in the bond between the bag and the apron(?) material around the quick connect fitting. I slathered as much as I could inside and outside the leak/joint and (knock on wood) it has held for a season so far.
2017 Moomba Helix