Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2010
    Location
    Katy, TX
    Posts
    6,369

    Default Gator Step Replacement

    We had a delamination spot in the main floor panel of gator step which drove me crazy the last year and half. Well we decided to tackle replacing it this year which was a year too late because apparently if I would have tried when the bubble started it would have been covered under warranty. Instead I’m out $1600+ on new flooring.

    Anyways this is a chore, pulling up all the gator step for the whole interior. I got all the floor pieces up today and now im starting on the process of removing all the residue. This is going to take longer than I anticipated.

    We were told by gatorstep that we need to do all the floor for the color to match due to sun fading, it seems the stuff on the textured panels is much easier to get up than the stuff that is on the smooth gel coat.






    Sent from my iPhone using Tapatalk
    David

    2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights

    SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD

  2. #2
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    Wonder if a wall paper steamer would help loosen the adhesive.
    Might be worth a shot.

    Not sure if leaving it the sun for awhile would also help.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  3. #3
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,078

    Default

    Been there done that. I broke my project into sections so it did not get me frustrated.

    Lots and lots of rags, razors and/or plastic scraper, acetone, and that 3M adhesive.

    Even tired WD40, not it sure that helped to get all those little glue boogers removed.


    Sent from my iPhone using Tapatalk
    2018 Supra SL400

  4. #4
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,960

    Default

    Man! I replaced the small footpads and rear boarding platform on a jetski a few years ago. I couldn't imagine having to do a whole boat floor. I am crying and cussing for you just looking at that!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •