Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17
  1. #11

    Default

    Quote Originally Posted by HFarr View Post
    So are you saying the ball eroded away from the pin, is it this?

    Sent from my SM-G781V using Tapatalk
    No. The actual piece lost some of it's metal so now the ball will not stay on place. It will slide back and pin in but then comes out with wind/bounce.

    Sent from my Pixel 6 Pro using Tapatalk
    2005 Moomba Outback DD - SOLD
    2020 Moomba Max

  2. #12

    Default

    Quote Originally Posted by htfit View Post
    If I am not mistaken, Roswell makes the bimini. I would just call them directly. That might be the quickest easiest way to get replacement.

    Sent from my SM-G975U1 using Tapatalk
    Good idea. Thanks.

    Sent from my Pixel 6 Pro using Tapatalk
    2005 Moomba Outback DD - SOLD
    2020 Moomba Max

  3. #13
    Join Date
    Aug 2021
    Location
    Knoxville
    Posts
    398

    Default

    Be advised Roswell charges some rediculously expensive prices for all their parts. If you are handy and willing to look around you can probably save a good bit of coin on that small part biying anywhere other than from Roswell.
    2019 Craz
    OJ 950
    Wakemakers bags
    Heatercraft triple heater

  4. #14
    Join Date
    Aug 2021
    Location
    Knoxville
    Posts
    398

    Default

    Measure your tube but this one fits 7/8 tube https://tacomarine.com/canvas-shade-ball-socket-top-fittings-f13-0242
    2019 Craz
    OJ 950
    Wakemakers bags
    Heatercraft triple heater

  5. #15

    Default

    Quote Originally Posted by Mxmark4 View Post
    Be advised Roswell charges some rediculously expensive prices for all their parts. If you are handy and willing to look around you can probably save a good bit of coin on that small part biying anywhere other than from Roswell.
    That's what I was noticing on the Roswell site. I didn't see the specific part online but the stuff I saw was outrageously priced.

    Sent from my Pixel 6 Pro using Tapatalk
    2005 Moomba Outback DD - SOLD
    2020 Moomba Max

  6. #16

    Default

    Quote Originally Posted by Mxmark4 View Post
    Measure your tube but this one fits 7/8 tube https://tacomarine.com/canvas-shade-...tings-f13-0242
    That's the one I saw as well. I'll have to get into the boat tomorrow to double check on measurements. Thanks Mark

    Sent from my Pixel 6 Pro using Tapatalk
    2005 Moomba Outback DD - SOLD
    2020 Moomba Max

  7. #17

    Default

    Just wanted to say thanks for the help. I got it figured out. Called Roswell and the price with shipping is $44.17. Which is actually less than what tacomarine was charging with shipping... $47. So it's out there... The part is a Bimini deck hinge - part number C717-5190.

    Sent from my Pixel 6 Pro using Tapatalk
    2005 Moomba Outback DD - SOLD
    2020 Moomba Max

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •