Results 1 to 10 of 17
Thread: Question on Bimini Part
-
02-21-2023, 08:34 PM #1Member
- Join Date
- Apr 2021
- Posts
- 69
Question on Bimini Part
Hey All,
Does anyone know what the part on the bimini is called that holds the second pole and has a pin that goes through it? It is about an inch or two long and has an opening on the top for the ball at the end of the pole to slide into and then it gets pinned in. And also where I can order it? It's for a 2020 Max. It's stripped out and the post keeps slipping off. I've tried to add a picture but the thread is not letting me. I'll see if I can do so after the initial post. Thanks in advance. Wren
Update: I tried to add a picture in a reply and it's still not letting me. Not sure why but the upload button just isn't working on my end. I added a little more detail on the part. Hopefully the above makes sense.Last edited by Wren; 02-21-2023 at 08:41 PM.
-
02-22-2023, 03:57 PM #2
You can create a Tapatalk account and add photos through this forum on the app. Much easier and the photos are larger than through the forum by itself.
2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
02-22-2023, 06:07 PM #3
Double thumbs up for Tapatalk!! The free account works well too.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
02-23-2023, 12:23 AM #4Member
- Join Date
- Apr 2021
- Posts
- 69
Got Tapatalk and was able to add some pictures. Thanks for the tip. It was super easy to do.
Sent from my Pixel 6 Pro using Tapatalk2005 Moomba Outback DD - SOLD
2020 Moomba Max
-
02-23-2023, 07:18 AM #5
When you say stripped out are you referring to the screws holding it to the main bimini frame? If thats the case you could go up a size on screws or move it fore/aft a bit and redrill the screw holes.
2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
02-23-2023, 09:06 AM #6Member
- Join Date
- Apr 2021
- Posts
- 69
It's the actual piece that is "stripped". Sorry my description above was all over the place. Basically the ball at the end of the post eroded away at the portion near the pin and now it won't stay in place. It's hard to see in the picture.
Sent from my Pixel 6 Pro using Tapatalk2005 Moomba Outback DD - SOLD
2020 Moomba Max
-
02-23-2023, 02:18 PM #7
Look at taco marine. They have several styles that you could use to replace that socket. I just googled bimini top ball socket and got a ton of results
2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
02-23-2023, 02:53 PM #8Member
- Join Date
- Apr 2021
- Posts
- 69
-
02-23-2023, 04:32 PM #9
If I am not mistaken, Roswell makes the bimini. I would just call them directly. That might be the quickest easiest way to get replacement.
Sent from my SM-G975U1 using Tapatalk- Jason
2019 Moomba Max
-
02-23-2023, 06:06 PM #10
So are you saying the ball eroded away from the pin, is it this?
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub