Results 1 to 5 of 5
Thread: Ballast tubing size
-
08-12-2022, 09:13 AM #1
Ballast tubing size
Looking to do some work to raising the ballast sensors after replacing my rear bags with the WM upgraded bags. Wondering if the stock tubing size is 1-1/8?
Sorry if this info is out there already, I tried googling and did a few searches on here.‘22 Moomba Max
Wakemakers factory bag upgrade (yes its worth it)
Surf Regular, plate at 65, speed 11.1, pitch: 8.5, roll: -1.5
Still tinkering with everything
-
08-12-2022, 12:40 PM #2
-
08-13-2022, 08:23 AM #3
Thank you sir!
‘22 Moomba Max
Wakemakers factory bag upgrade (yes its worth it)
Surf Regular, plate at 65, speed 11.1, pitch: 8.5, roll: -1.5
Still tinkering with everything
-
08-13-2022, 06:42 PM #4
Ballast tubing size
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
08-14-2022, 06:33 PM #5
I do indeed have a heat gun ready to go. Thanks again
‘22 Moomba Max
Wakemakers factory bag upgrade (yes its worth it)
Surf Regular, plate at 65, speed 11.1, pitch: 8.5, roll: -1.5
Still tinkering with everything