Results 11 to 20 of 23
-
08-01-2022, 08:27 AM #11
Honestly, any automotive waterless wash or quick detailer with some vinegar added will work great. Just need that acid to tackle the water spots.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
08-01-2022, 10:40 AM #12
It was either buy HS or buy EchO2.
4-5 gallons for $32 or 32oz for $20.
Pretty easy decision...thanks2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
08-01-2022, 11:52 AM #13
Help on using Hula gnarly #9 water spot remover.
Last edited by larry_arizona; 08-01-2022 at 11:56 AM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
08-01-2022, 01:21 PM #14
-
08-09-2022, 04:24 PM #15
Interesting it was giving you issues although I haven't used Hula water spot remover in a long time. I swapped to their detail spray #11 , it works very well, wet or dry, but I also don't have a ceramic coated boat either just waxed using Hula's wax and sealer.
2021 Makai
-
08-09-2022, 06:22 PM #16
Mine arrived in 2 days and is currently awaiting a spray bottle to put it in. I am excited to try this out and see how it does!
2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
08-14-2022, 05:13 PM #17
Been using Ech to spot clean boat and it seems to work well. Used it today as wet wipedown after pulling it out of the lake and I feel like it better than hot sauce. Thanks to Larry for the recommendation!
2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
08-14-2022, 05:57 PM #18
-
08-14-2022, 06:10 PM #19
I have been using “Spotless” for the last 5 summers as that is what the dealer recommend. It works pretty well, but I was just at the lake for 6 days and have a major issue with water spots that won’t come off completely. I have never had this happen, but I have some at the water line that I had to use Maguires cleaner wax to remove. You could actually feel the surface was rough. Even after waxing I can still feel the surface is not completely smooth. I wax my boat at the beginning of every season with Collinite Insulator wax (also recommended by my dealer), use Spotless each time I take it out, and quick wax with Mother’s Marine about every 4-5 times out. Any other ideas of what I can use to buff the surface? I was at this same lake 3 weeks ago and did not have this problem. I am kind of baffled.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold
-
08-14-2022, 08:09 PM #20