Raw water pump mounting stud failure

[DRHRSH]

Hello,
I have a 2016 Craz with the standard Raptor engine. The only problems I have had since I bought the boat new are related to the Raw water pump. About 3 yrs ago one of the brackets that support the water pump broke. Yesterday I discovered the stud bolt that mounts the bracket to the engine sheared off. I was able to retrieve the stud bolt with a 7/8” socket. The parts guy had a hard time figuring out which part I needed. Pictures help. Not sure if anyone has had this problem but I thought I would post. The part number is in the picture.
72FA1B1D-DCE8-434C-AEAA-CDA2B898DCE7.jpg
3F369AB8-2F70-4ACA-AAA8-D8CB96D56355.jpg
2FD2A83F-5EBF-441A-9AB7-08E5DF87F4AC.jpg
F1227D86-C01D-47B5-B9C4-3E93AFB9580C.jpg

[Holdmybeer]

When I bought my boat second hand that bolt and the 2 bolts that mount the bracket together were all loose.

I removed, added blue locktite, re-torqued. Has been good ever since.

[Bula]

My son also had the same problem with his boat and bolt replacement helped him, but I don't know if it was the same detail or not.