No power with cruise

[Bigs28]

When cruise is active i have no power. No zero off. Just the paddle wheel. Im not getting the yellow pop up message for error put anything. Just no power. Anything i can fix or have to go to the shop?

[Holdmybeer]

More details needed.

No power....engine is running, in forward gear?
Does the boat move?

The cruise speed set to 0.0?
Something caught in the paddle wheel and it isn't reading?
Failed paddle wheel sensor?

The cruise is not allowing you to accelerate is what I am guessing.

[Bigs28]

Boat is running but won't go barely past idle. Cruise is set at 21. Now my wakeplate isn't working and stuck at 50. Im not getting any error messages.


I will make a video

[Bigs28]

https://youtu.be/ynI7YBlM3EA

[Bigs28]

Wakeplate not working either......

https://youtu.be/D89_lrXQLmk

[2in2out]

Power cycle to reset the computer. Are you cruising on one or both batteries? Try switching batteries o running on both.

I have to do this on mine when autowake starts acting up on cruise.


2022 SA 450

[Bigs28]

I reset several times. Shut the battery off for about 20 minutes and let it cycle. Same thing. It's also starting in autowake. I start the boat and autowake is on and starts filling the ballasts. Its definitely not acting right.

[Holdmybeer]

I don't have the 7" screen so I have to ask, does the screen just act as a display and there is a cpu unit somewhere?

If the display itself is also the computer then maybe you can reset that somehow.

Can you turn off Autowake after starting and turn off cruise?
Then does the wake plate move and you can drive the boat?

[Bigs28]

I can turn off autowake yes. Then i use the toggle switches to drain the 2-3% it fills when i start the boat but no matter what the wakeplate and cruise don't work. Ive emailed videos to dealer so hopefully i hear something tomorrow.

[Bigs28]

Boat starting with autowake on.


https://youtu.be/1BhOqJZXEa0