Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32
  1. #11
    Join Date
    May 2018
    Posts
    4,920

    Default No power with cruise

    My Supra starts with autowake on too.

    I would love to know how to change this.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  2. #12
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,953

    Default

    I noticed your depth gauge is showing zero as well in all videos. Not sure if that has anything to do with why autowake is on when you start up, but may indicate something being up with the ecm?

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  3. #13
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,251

    Default

    I noticed the wakeplate was at 100% in your last video.
    Did this "magically" get fixed? Or if you engage cruise it goes back to 50%.

    My friend craz doesn't start in autowake. I thought somewhere you could turn off profiles or surf mode and autowake won't auto start.

    Leaning towards ECM issues of a bad sensor. Does the new boats still use a triducer? Hfarr mentioned 0 depth jist curious.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  4. #14
    Join Date
    Jan 2021
    Location
    South Florida
    Posts
    274

    Default

    Depth always says zero because i didn't addon the depth finder in the build. My lake is 70 feet deep and didn't need it. Went out today and 4 times i started the boat to make videos for the dealer and the wakeplate did not work and then magically 1 time it did. I can't seem to reproduce why it works every now and then. The boat has not worked with cruise control since yesterday morning with multiple restarts and battery resets.

  5. #15
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,251

    Default

    Check your battery ground cables. Either loose at the batteries, loose at the buss bars under the dash, loose at the amp rack.

    I sound like a broken record on some of these post but ground issues will cause all kinds of crazy things. You have a ground cable on the motor also. A loose connection would explain all of these issues (except autowake running at startup)
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  6. #16
    Join Date
    Jun 2020
    Location
    Reno, NV
    Posts
    741

    Default

    Quote Originally Posted by larry_arizona View Post
    My Supra starts with autowake on too.

    I would love to know how to change this.


    Sent from my iPhone using Tapatalk
    I have the opposite issue. Every time we shut down to p/u a rider, or change out riders, autowake shuts off, and we have to turn it back on.


    2022 SA 450
    2020 SA 450 Wife calls it White Cloud. Said it makes her feel "Classy"
    2017 Sanger V215sx. We call it Viagra because it's the little blue pill that gets everyone up (Sold)

  7. #17
    Join Date
    Jun 2022
    Posts
    5

    Default

    I am having this exact issue with my 21 Mojo. I can even be up to speed and then turn on cruise, which kills the power down to 1,500 rpms. Like you I received the error message a couple times and now nothing, just stuck at 1,500 rpms when cruise is on. This happens with surfing, wakeboard, and Go Home leveling, any time cruise is turned on.

    So far I've tried cycling the battery, trying each battery separate, but havent tried both batteries at the same time.

    Someone on Facebook mentioned that I may be able to get into the Settings on the computer and do a hard reset, pushing everything back to factory default. When doing that, you'll have to reset your inclinometer afterwards. This will be the next thing I try when I get back out on the boat.

    I also poked around to see if all cables and buses were snug. I suppose I should dig around and look a bit closer to make sure.

  8. #18
    Join Date
    Jan 2021
    Location
    South Florida
    Posts
    274

    Default

    Yeah dealer hasn't got back to me yet and ive checked all the cables per previous recommendation and didn't find anything loose.

  9. #19
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,251

    Default

    Quote Originally Posted by Bigs28 View Post
    Yeah dealer hasn't got back to me yet and ive checked all the cables per previous recommendation and didn't find anything loose.
    Did you order your Mojo with zero off cruise only?
    No paddlewheel backup?
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  10. #20
    Join Date
    Jan 2021
    Location
    South Florida
    Posts
    274

    Default

    The opposite. I only have paddle wheel. No zero off. It's a 2021.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •