Results 1 to 3 of 3
-
06-18-2022, 08:25 PM #1Junior Member
- Join Date
- Oct 2021
- Location
- Michigan
- Posts
- 13
2015 Moomba Mojo Stock Tower Speaker Delete
Hey everyone I’m hoping someone may be able to steer me in the right direction. I have the stock Roswell 6.5 tower speakers on my Pro Wake tower. They are wired into the tower and have stock mounts that fit flush into the tower. I am looking at putting a pair of rev 10’s and removing the four smaller Roswell’s. Well I can’t find a mount plate that will fit on the tower to cover where the Roswell mounts were. I have seen pictures of flush plates that cover it on other Moombas but I cannot for the life of me find them anywhere. Any ideas or tips?
2015 Moomba Mojo
2021 Dodge Ram 1500
-
06-19-2022, 08:34 AM #2
What tower do you have?
The S- Bend tower is almost the same design Supra put on the Launch. Parts for Supra S-Bend work on the Moba version. Both were made by Roswell.
Exile makes adapters for both upper and lower locations.
https://www.exileaudio.com/collectio...-upper-adaptor
https://www.exileaudio.com/collectio...-lower-adaptor2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
06-20-2022, 12:16 AM #3Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
What HMB said ^^^^
I have the S-bend tower and went with Exile for that very reason
Sent from my iPad using Tapatalk2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE