Moomba Makai Owners- Adding Weight?

[BrentC5Z]

https://youtu.be/61zloWEOCEw
‘22 Makai


Sent from my iPhone using Tapatalk

[TXSurf4]

https://youtu.be/61zloWEOCEw
‘22 Makai


Sent from my iPhone using Tapatalk

Awesome video! It had actually popped up in my feed before I saw it here. I am going to do the dome light mod next weekend so I can turn it off on the 4th while we watch fireworks. Did you just mount the switch with double sided tape? I never realized that the bags were specific to the port and starboard side they defintely should have put that on the box and was a definite miss on Wakemakers end. I will have to climb in there and see if I just got them right by luck lol. If you aren't using your rear trays anymore venting the bags off the top and teeing in to the overflow is a great way to go I know Hak had mentioned it as well.

[BrentC5Z]

For sure. l’ll probably vent the bags next. I like using the rear lockers for board storage so the trays will stay out.
I used two sided tape that came on the switch. Had one laying around.


Sent from my iPhone using Tapatalk

[HFarr]

Awesome video! It had actually popped up in my feed before I saw it here. I am going to do the dome light mod next weekend so I can turn it off on the 4th while we watch fireworks. Did you just mount the switch with double sided tape? I never realized that the bags were specific to the port and starboard side they defintely should have put that on the box and was a definite miss on Wakemakers end. I will have to climb in there and see if I just got them right by luck lol. If you aren't using your rear trays anymore venting the bags off the top and teeing in to the overflow is a great way to go I know Hak had mentioned it as well.

Yeah. I think SC missed the dome light issue big time. They could have easily done that. I put a little switch on mine the first month I had the boat.

Sent from my SM-G781V using Tapatalk

[TXSurf4]

Yeah. I think SC missed the dome light issue big time. They could have easily done that. I put a little switch on mine the first month I had the boat.

Sent from my SM-G781V using Tapatalk

Do you have a picture of yours you can share? I feel like you did on an older post but I can't seem to find it.

[HFarr]

Do you have a picture of yours you can share? I feel like you did on an older post but I can't seem to find it.

I used a little cheap push switch out of a solar yard light from Walmart

Sent from my SM-G781V using Tapatalk

[HFarr]

Very very easy to do. Just cut one wire and put the switch in the circuit. Any sort of switch will work. Just whatever you think looks the best. I looked at some little slide switches too from some kids toys!

Sent from my SM-G781V using Tapatalk

[HFarr]

Now why couldn't SC do this in the factory? Maybe I should apply for a job there! I have tons of ideas LOL! I bet it would be a fun job designing things for boats. Did it for the telecom world for a while. Neat, but not what I would call fun.

Sent from my SM-G781V using Tapatalk

[TXSurf4]

Very very easy to do. Just cut one wire and put the switch in the circuit. Any sort of switch will work. Just whatever you think looks the best. I looked at some little slide switches too from some kids toys!

Sent from my SM-G781V using Tapatalk

Thanks for sharing! I only worry about the clearance on the inside of the light cover with switches I have found. Do you recall how much clearance was in there?


Sent from my iPhone using Tapatalk

[HFarr]

I don't know exactly what the clearance is. Would have to go measure it. That little push button I used only sticks out about 1/4", so it's never been a problem.

Sent from my SM-G781V using Tapatalk