Results 21 to 30 of 127
-
06-09-2022, 08:18 AM #21
-
06-09-2022, 03:45 PM #22
Awesome video! It had actually popped up in my feed before I saw it here. I am going to do the dome light mod next weekend so I can turn it off on the 4th while we watch fireworks. Did you just mount the switch with double sided tape? I never realized that the bags were specific to the port and starboard side they defintely should have put that on the box and was a definite miss on Wakemakers end. I will have to climb in there and see if I just got them right by luck lol. If you aren't using your rear trays anymore venting the bags off the top and teeing in to the overflow is a great way to go I know Hak had mentioned it as well.
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
06-09-2022, 04:14 PM #23
For sure. l’ll probably vent the bags next. I like using the rear lockers for board storage so the trays will stay out.
I used two sided tape that came on the switch. Had one laying around.
Sent from my iPhone using Tapatalk
-
06-09-2022, 06:43 PM #242021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-10-2022, 02:35 PM #25
-
06-10-2022, 07:26 PM #262021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-10-2022, 07:29 PM #27
Very very easy to do. Just cut one wire and put the switch in the circuit. Any sort of switch will work. Just whatever you think looks the best. I looked at some little slide switches too from some kids toys!
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-10-2022, 07:32 PM #28
Now why couldn't SC do this in the factory? Maybe I should apply for a job there! I have tons of ideas LOL! I bet it would be a fun job designing things for boats. Did it for the telecom world for a while. Neat, but not what I would call fun.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-10-2022, 10:08 PM #292019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
06-11-2022, 10:46 AM #30
I don't know exactly what the clearance is. Would have to go measure it. That little push button I used only sticks out about 1/4", so it's never been a problem.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub