Results 71 to 80 of 127
-
06-26-2022, 06:04 PM #71
I also took this one of it deflated at the bulkhead where it goes through showing that mine doesn’t go “end to end”
Also for those that didn’t know (like me) there is a diagram on the bottom of the bag indicating the location of where it goes. I just happened to get lucky as I didn’t look for this when installing
Sent from my iPhone using Tapatalk2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
06-26-2022, 11:50 PM #722021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-27-2022, 01:16 PM #73
-
06-27-2022, 11:02 PM #74
If it’s that close to the bulkhead then I think they’re correct. My first bags were much, much shorter.
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
06-28-2022, 07:11 AM #75
-
06-28-2022, 01:43 PM #76
Both of these comments and your pics are making me feel better now. I take back all the bad things I was thinking about WM now! LOL! But hey when you can actually measure a 6" difference in length on the stock vs new......makes you start wondering what's up.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-28-2022, 03:00 PM #772019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
06-29-2022, 01:14 PM #78
I wished I had measured my short WM bags to compare to stock before I sold them. Would be curious just how short mine were. It was by a lot I know that because I was concerned the connectors on the rear of the bag would wear or rip over time from the stress of having to be stretched just to connect to the mid ship bags. Thankfully I never ran those bags and were given replacements by WM that now fit as they should. The rear lockers of the Makai and the Max aren’t exactly the same it seems so it is strange they made a “one size fits both boats” bag. Based off y’all’s locker and filled bag pics it looks like WM left some meat on the bone with the Makai because there appears to be more room they could have used up in the upper “notch” shape of the bags. Just going by pics of course and maybe looks different in person. In the end if the wave looks killer and rides good now that’s what really matters I suppose. Just make sure the bag doesn’t move front to back a lot when filled and I think you’re good.
I will say go ahead and plan for strengthening your engine panels if you haven’t already because mine will pop in now that they’ve been pressed on a lot over time. Going to add some metal channel stock to beef them up. The port side is more of a concern when it collapses because of the oil dip stick can take some of the bag resting on it which isn’t good of course.2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
06-29-2022, 03:15 PM #792021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
06-29-2022, 03:20 PM #80
I really have to say the way SC made those panel systems is not a very sturdy design. And honestly the hdpe panels are not the best material choice for rigidity either. That stuff gets soft and more flexible as the engine starts to heat it up.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub