Results 1 to 4 of 4
-
05-23-2022, 03:51 PM #1
Junior Member
- Join Date
- Jun 2021
- Posts
- 10
2008 Moomba LSV how to unplug the Moomba Cruise
Greetings,
2008 Moomba LSV crusie control stuck at 2900 rpm.
Kicks in about 30 secs into ride.
Can't find how to disconnect, I don't need the crusie control.
Anyone know how to disconnect in engine compartment?
-
05-23-2022, 04:40 PM #2
Super Moderator
- Join Date
- May 2009
- Location
- North End Lake Lanier GA
- Posts
- 8,155
Have you tried disconnecting the battery over night to see if it will clear it from memory?
Id assume the wires goto the ECM of the boat.Malo <--- Means--Evil or Mean One. This explains a lot.
2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
[COLOR="#696969"]
-
05-24-2022, 10:27 PM #3
Junior Member
- Join Date
- Jun 2021
- Posts
- 10
Originally Posted by mmandley
YES. Still stuck at 2900rpm. It will go faster at startup; then cruise kicks in after 30 seconds. Anyone have a picture of disconnecting in engine compartment? I cannot get under dash.... tried many times.
-
05-24-2022, 10:30 PM #4
Junior Member
- Join Date
- Jun 2021
- Posts
- 10
Attached are pics of engine compartment. Where is cruise actuator?
Reply With Quote