playing on my boat in my shop last night, decided to take a look at the wakeplate travel, more out of curiosity, as i wondered if you could accidentally flip surf on and damage the plate on the trailer.

well, surf tabs wont hit the trailer, but will hit the transom straps if they are still on. But I ended up with a couple concerns/questions:

for the Flow 3.0, do the added actuators only activate in the water, or when autowake is set? they didnt move with the surf side switch on.

MAIN CONCERN I noticed the wake plate actuator only went out about 1-2 inches, AND travel stopped at about 30-35% is this normal?

If i ran the WP to 0, it would re-zero, and travel would stop at 65-70. and if i ran to 100 (which is default when you turn key on) travel would stop at about 35-30.

wondering if anyone else noticed this, and if it is normal operation.