Results 1 to 10 of 11
-
05-10-2022, 10:29 AM #1
anyone else have a fuel tank cover that sits high?
2022 mojo, noticed a few sloppy/fit issues with the build... so far, just taking care of them on my own instead of wasting time taking it to the dealer and roll the dice on how well they fix it if at all.
The center floor/fuel tank cover sits proud. most noticably where the trash/storage door is... like enough to trip on and definitely show wear over time.
I ignored it all winter, but now i am prepping to be on the water this weekend, it is bugging me.
So i pulled the cover. My eyes didnt lie. the whole think is about 1/8" proud, and the front edge by the storage door is about 1/4" proud. I am guessing they used a belt sander to trim the edges as they arent that straight.
Either way, i plan on essentially planing it either with a sander or router. I was just gonna do the front edge, but i may as well do it all.
Anyone else notice or have this issue?2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation
previous: 2007 centurion elite V air warrior
-
05-10-2022, 01:40 PM #2
Must have been the new guy working on a Friday!!
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-10-2022, 02:27 PM #3
most likely haha.... seriously tho, ive been to shops and know that there is always a chance for human error, especially if its the new guy. obviously it wasnt that noticeable or i would have caught it at the dealer. things get noticed more when you sit and dream in the boat all winter in a heated shop
2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation
previous: 2007 centurion elite V air warrior
-
05-10-2022, 02:48 PM #4
After learning to surf last year and teaching both my daughters (9 and 7) how to kneeboard, this has been a long winter.
Finally breaking 80's in Ohio this week. Maybe the water will be warm enough by memorial day.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
05-10-2022, 03:08 PM #5Senior Member
- Join Date
- Jan 2021
- Location
- South Florida
- Posts
- 274
Mine was the same exact way. It was on my list when i took it in for break in service. Dealer got the ledge smaller but it's still there for sure.
-
05-11-2022, 11:17 AM #6
glad im not the only one haha.... fixed it last night... 3d printed a 2" standoff for my router, and set the height, using it like a planer with the floor laying on a table top, worked great and now it is sitting flush like it should!
now my only beef is with the v-drive cover... but its more out of sight so ill just leave it. It could use a slight trim, but it is also short, so it doesnt sit on the gasket like it should, so i may just add more gasket if i notice noise.2022 Mojo - 400 - flow 3 - OJ 930 15.5x15 prop - 1k lead - 2.5-3k elevation
previous: 2007 centurion elite V air warrior
-
05-11-2022, 04:16 PM #7
Don't you just love paying this much and then still having to fix stuff haha?
I'e had several little things like that on my SA as well.2020 Supra SA
-
05-11-2022, 04:45 PM #82021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-11-2022, 04:53 PM #9
-
05-11-2022, 04:56 PM #10
I have some pics of what I did posted somewhere in a past thread.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub