Results 1 to 10 of 10
Thread: Tower light housing.
-
05-02-2022, 02:04 PM #1
Tower light housing.
Busted the tower light and grey housing 2016 Moomba Craz. Can find the light but not the housing. Any help appreciated!
-
05-02-2022, 02:20 PM #2
Are you talking about black plastic part?
https://www.amazon.com/Attwood-5580A...04439387&psc=1Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
05-02-2022, 03:50 PM #3
The Attwood part Scott posted is the whole unit.
Been there....garage door wasn't open enough. 2 Phillips screws and 2 wires all is better.
The light is a twist lock into the base.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
05-02-2022, 05:57 PM #4
Haha, me too! I only have about 1 inch of clearance from the tower light (when the tower is all the way down) to the top of the garage. Went a little to fast once and broke it.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
05-02-2022, 08:05 PM #5
Mine was broken when I bought the boat. I literally just fixed it yesterday. Had to tap out the holes to a larger screw but its finally all back together. Now I just have to clean the adhesive off it from the black tape that was holding it up.
2019 Craz
OJ 950
Wakemakers bags
Heatercraft triple heater
-
05-03-2022, 08:11 AM #6
Not the black plastic housing of the light. I broke the grey housing that mounts to the tower.
-
05-03-2022, 10:11 AM #7
Post a picture
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-03-2022, 10:33 AM #8
Definitely need a picture.
If I went any lower I would have grabbed the tower and broke the garage door. Further down on mine is metal.2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
05-03-2022, 12:19 PM #9
moomba tower.jpg
See the silver part the light bolts too?
-
05-03-2022, 12:20 PM #10
First time adding pics. I will learn. lol