Results 1 to 10 of 10
  1. #1
    Join Date
    Feb 2022
    Posts
    9

    Default 2018 Moomba MAX prop dinged, suggestions for a new one

    Hello,
    Recently purchased a 2018 max, great boat.

    Did not notice there was a small ding on the prop when I purchased it, Dang!

    Currently it has a OJ wakepro 15x13, seams to be fine, I think it vibrates sometimes, haven't put too many hours on it yet, Otherwise seams fine.

    We are mostly going to be using for Surfing, but also wakeboarding and skiing for guests. We are still beginners on the surfing.

    We keep the boat on a lift and don't usually go far distances, but would like a decent cruise speed. Usually we will have 4-8 people on board, and 2 dogs

    Stock ballast but looking to add 1500-2000 lbs.maxatdock.jpgMax-dogs.jpg

    I see the OJ-945 and 2419 recommended, and even the 1234? I think.

    Ding is not too bad, so I will either repair and keep as a spare, or get professionally fixed and keep as a spare.

    Any recommendations would be helpful,
    Thanks,
    Brucebent-prop.jpg

  2. #2
    Join Date
    Apr 2013
    Location
    Knoxville TN
    Posts
    3,078

    Default

    Quote Originally Posted by BruceNc View Post
    Hello,
    Recently purchased a 2018 max, great boat.

    Did not notice there was a small ding on the prop when I purchased it, Dang!

    Currently it has a OJ wakepro 15x13, seams to be fine, I think it vibrates sometimes, haven't put too many hours on it yet, Otherwise seams fine.

    We are mostly going to be using for Surfing, but also wakeboarding and skiing for guests. We are still beginners on the surfing.

    We keep the boat on a lift and don't usually go far distances, but would like a decent cruise speed. Usually we will have 4-8 people on board, and 2 dogs

    Stock ballast but looking to add 1500-2000 lbs.

    I see the OJ-945 and 2419 recommended, and even the 1234? I think.

    Ding is not too bad, so I will either repair and keep as a spare, or get professionally fixed and keep as a spare.

    Any recommendations would be helpful,
    Thanks,
    Bruce

    bent-prop.jpg
    maxatdock.jpg
    Max-dogs.jpg

    You might want to call OJ Props and talk to Eric. I recall 948 was the newer version of the 945 or 951 with a more cup.

    Also, be careful when reading about new MAX boats. They change the trans ratio from 2018.
    Last edited by MJHSupra; 04-25-2022 at 12:31 PM.
    2018 Supra SL400

  3. #3
    Join Date
    Feb 2018
    Location
    Boating on Lake Martin, AL
    Posts
    1,523

    Default

    Surf option prop for 1:5 trans was OJ 945. That’s the same prop I run on my 2019 and it does great for sea level. I run anywhere from 5,000 to 5,800 ish lbs of ballast. Top speed is still high 30’s low 40 mph. Cruising at 25 ish mph my RPM is around 3200-3300 range IIRC.
    Last edited by haknslash; 04-25-2022 at 01:20 PM.
    2019 Moomba Max "MOOMBAE"
    Mods: Wakemakers upgrade + 500 lbs of lead
    2016 Yamaha AR192 - sold

  4. #4
    Join Date
    Feb 2022
    Posts
    9

    Default

    Quote Originally Posted by MJHSupra View Post
    You might want to call OJ Props and talk to Eric. I recall 948 was the newer version of the 945 or 951 with a more cup.

    Also, be careful when reading about new MAX boats. They change the trans ratio from 2018.
    Thanks for the reply, I did not know about the trans ratio.

    I called Eric he recommended the 1922, 15 x 12.5, and if I buy it from them they offer a free prop repair.

    Thanks,
    Bruce

  5. #5
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,963

    Default

    That sounds like a good deal. I don't think your repair will be a hard one. That bend isn't terrible, and honestly you could probably get some of that out with a couple of crescent wrenches yourself and make any vibration you are feeling much less. But, if you're gonna get the new one, just go ahead and let them take care of it.

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  6. #6
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,963

    Default

    What lake is that?

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

  7. #7
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    I would always keep two props, that way if you ding one, you can have a backup while you get the other fixed.

    I have the factory wake prop and an aftermarket surf prop, and honestly depending on the summer is how I chose my prop.

    This summer we have a lot of family visiting and I see a lot of people and surfing so I have the surf prop on LOL
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

  8. #8
    Join Date
    Feb 2022
    Posts
    9

    Default

    Quote Originally Posted by HFarr View Post
    What lake is that?

    Sent from my SM-G781V using Tapatalk

    It's lake Gaston on the Va. NC border.

    We are off the main lake, so it's smoother where we are.

    Thanks all for suggestions, keep them up..

    Leaning towards the one OJ props recommended, the 1922, that way I'll have a spare as needed.

    I may try to readjust it a little.

  9. #9
    Join Date
    Aug 2021
    Location
    Knoxville
    Posts
    405

    Default

    Went down to OJ on Tuesday, to drop off a prop for repair, amazing folks to deal with. Had my kids with me since they were out of school and they even hooked my boys up with some lil swag bags. They told me if I had brought it in earlier in the day they would have had it done same day. Thats the kind of service I miss.
    2019 Craz
    OJ 950
    Wakemakers bags
    Heatercraft triple heater

  10. #10
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,963

    Default

    Quote Originally Posted by Mxmark4 View Post
    Went down to OJ on Tuesday, to drop off a prop for repair, amazing folks to deal with. Had my kids with me since they were out of school and they even hooked my boys up with some lil swag bags. They told me if I had brought it in earlier in the day they would have had it done same day. Thats the kind of service I miss.
    That's service the way it should be. Hardly find anyone willing to do that anymore!! Hats off to them!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •