Non-Indmar oil filter part number

[crnajerry]

Apologies upfront as I’ve searched the forums to no avail…but cannot seem to find any part numbers for non-indmar oil filters for our ‘20 Max raptor 6.2L engine.

Is Fram 9954 correct?

Thanks in advance for any assistance!


Sent from my iPhone using Tapatalk

[Holdmybeer]

Personally I wouldn't use Fram, but opinions are just that, so completely your call. But yes correct number.

Indmar - 501022
Mann - HU 719/8 x
Wix - 57186
Baldwin - P7417
Volvo - 8642570
Fram - CH9954

[larry_arizona]

Apologies upfront as I’ve searched the forums to no avail…but cannot seem to find any part numbers for non-indmar oil filters for our ‘20 Max raptor 6.2L engine.

Is Fram 9954 correct?

Thanks in advance for any assistance!


Sent from my iPhone using Tapatalk

Here is a list from Rockauto





Sent from my iPhone using Tapatalk

[larry_arizona]

The Indmar filter is a relabeled Mann hu 719/8x

Mann makes most of the German OEM filters.

I run the Mann HU719/8x or the Wix 57186XP, both are synthetic oil specific. The XP has gone way up in price and scarce now.


Sent from my iPhone using Tapatalk

[crnajerry]

Thanks so much! Super helpful


Sent from my iPhone using Tapatalk

[crnajerry]

The Indmar filter is a relabeled Mann hu 719/8x

Mann makes most of the German OEM filters.

I run the Mann HU719/8x or the Wix 57186XP, both are synthetic oil specific. The XP has gone way up in price and scarce now.


Sent from my iPhone using Tapatalk

Ordered two Wix filters…thanks again! Any chance you know what side the “nut” is on the oil filter spin off cap?


Sent from my iPhone using Tapatalk

[larry_arizona]

Starboard rear


Sent from my iPhone using Tapatalk

[crnajerry]

Thanks so much for the detailed oil filter cross reference! So helpful. I will use rock auto more often now!

One more question which you may or may not know - have you ever used a socket on the “nut” on the top of the cartridge oil filter housing - if so what size is that sucker? I used a wrench but it’s plastic and I didn’t want to tear it up.

As always, thank you for the info!


Sent from my iPhone using Tapatalk

[Holdmybeer]

If it like the Volvo and Mini cartridge filters it should be 19mm or 21mm depending on the housing.

[larry_arizona]

I use a rubber strap oil filter wrench.


Sent from my iPhone using Tapatalk