Results 1 to 7 of 7

Thread: O2 Sensor

  1. #1
    Join Date
    Feb 2015
    Location
    Gardendale, AL
    Posts
    445

    Default O2 Sensor

    I have a 2014 Moomba with the 330 HP engine.

    Is this the O2 sensor I need:

    https://www.bakesonline.com/indmar-e...manifolds.html

    Thanks in advance and yes I was getting an O2 sensor at the end of last year so time to rectify that.
    Gil Hebert

    2014 Mojo

  2. #2
    Join Date
    Apr 2013
    Posts
    224

    Default

    Quote Originally Posted by ghebert1111 View Post
    I have a 2014 Moomba with the 330 HP engine.

    Is this the O2 sensor I need:

    https://www.bakesonline.com/indmar-e...manifolds.html

    Thanks in advance and yes I was getting an O2 sensor at the end of last year so time to rectify that.
    I have same year and same mode boat with 345 engine and have been getting O2 sensor error popping up a few times a season. What error are you getting? I’m getting SPN3050 FMI 11 . I may replace it this year in the off season. Following this thread as I may need the same thing…
    ----------------------------------------
    2014 Moomba Mojo 2.5
    2013 Moomba LSV (Sold)
    2013 Moomba Outback V (Sold)
    2002 Mastercraft X-5

  3. #3
    Join Date
    Feb 2015
    Location
    Gardendale, AL
    Posts
    445

    Default

    I think that is the one I was getting. One of the numbers indicates right or left. I switched the sensors and the code popped for the other side so I'm pretty sure mine is bad. I'll check on the code from the boat in the next day or 2.
    Gil Hebert

    2014 Mojo

  4. #4
    Join Date
    Apr 2013
    Posts
    224

    Default

    Keep me posted how it goes, and what part you end up with - I’ll likely need to do the same when my boat comes out of winter storage - good luck!!
    ----------------------------------------
    2014 Moomba Mojo 2.5
    2013 Moomba LSV (Sold)
    2013 Moomba Outback V (Sold)
    2002 Mastercraft X-5

  5. #5
    Join Date
    Feb 2015
    Location
    Gardendale, AL
    Posts
    445

    Default

    Finally ordered the part, I'll let you know if it works.
    Gil Hebert

    2014 Mojo

  6. #6
    Join Date
    Apr 2013
    Posts
    224

    Default

    Quote Originally Posted by ghebert1111 View Post
    Finally ordered the part, I'll let you know if it works.
    Fingers crossed - keep me posted if that worked for you... Were you getting SPN3050 FMI 11 code popping up?
    ----------------------------------------
    2014 Moomba Mojo 2.5
    2013 Moomba LSV (Sold)
    2013 Moomba Outback V (Sold)
    2002 Mastercraft X-5

  7. #7
    Join Date
    Feb 2015
    Location
    Gardendale, AL
    Posts
    445

    Default

    Installed a couple of weeks ago and no issues.
    Gil Hebert

    2014 Mojo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •