Results 21 to 30 of 35
Thread: Question on the new SternShade
-
02-07-2022, 08:24 PM #21
My old Mojo has cup holders at the rear corners. It wouldn't take much to machine an insert that would replace those with rod holders. Go ahead and make a couple hdpe rings for the underside to reinforce the glass and screw them down. If I can get the angle similar to Taco Marines video, just order the kit from them and done.
The front is a different story but the point of the boat is to have some sunlight....lol2015 Moomba Mojo Surf Edition
4,000lbs
Manual Flow
-
02-08-2022, 10:40 AM #22
Something like this would work fine,
https://www.marinedepotdirect.com/61...waAjZdEALw_wcB2020 Supra SA
-
03-05-2022, 11:07 PM #23
I was told same thing about not being able to add them to my 2022 Makai because it’s not reinforced unless it’s ordered that way.
2022 Makai 400
-
03-23-2022, 08:23 AM #24
So the “tent” poles are carbon fiber 5/8” dia. 4ft in length. Very stout
I haven’t looked at the mounting area yet to assess the reenforcement, but given it’s proximity to the cup holder (SA, SL, SE) I can’t see what more they could add their.
The tarp is the same as screen shading mesh, not canvas, so it will allow airflow. There are two buckles that connect to knobs on each side of the tower. It was too windy for me to set up yesterday and take picks.
I’ll take more picks today when we take it to storage.
Making my new SA build come true!!!2020 SA 450 Wife calls it White Cloud. Said it makes her feel "Classy"
2017 Sanger V215sx. We call it Viagra because it's the little blue pill that gets everyone up (Sold)
-
03-23-2022, 09:31 AM #25
Yea, I was surprised how stout those poles were and how well they fit into the mounts.
2018 Supra SL400
-
03-23-2022, 09:53 AM #26
I bet if you reach behind that cup holder area it is reinforced.
Typically it’s a styrofoam pad with holes in it and then they resin over the styrofoam.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
04-05-2022, 03:04 PM #27Junior Member
- Join Date
- Jul 2021
- Posts
- 13
We bought this:
WakeShade
Can’t wait to use it!
Sent from my iPhone using Tapatalk
-
04-05-2022, 04:40 PM #28
That looks awesome! I may have to look into that to see if it will work with our Sewlong Bimini.
2016 Moomba Mojo Surf Edition
2000 Sharpe Houseboat 70x16 (Lives at Lake Powell)
-
04-05-2022, 04:52 PM #29
That looks like it sits above the tow point so you could pull a surfer up with it deployed. Where did you get it?
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
04-05-2022, 05:59 PM #30
I know it’s not, but that shade looks like it’s hanging from the ceiling.
Sent from my iPhone using Tapatalk2018 Supra SL400