Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2021
    Location
    Germany
    Posts
    4

    Question Urgent - indmar 325 engine ticking noise

    Hi guys!
    My name is Mike and I am looking forward to be a Moomba owner as well and located in Germany.
    Today I did a test drive on a 2012 Mobius LSV with the 325hp engine with just 300 Hours. Considering the age, everything is in pretty good condition.
    The only thing is a ticking noise I noticed on the starboard side of the engine.
    Made a short video: https://youtube.com/shorts/dF7hs9czqHg?feature=share


    Also I noticed a short vibration during some Accellerations

    Is this normal?
    I would be very very thankful to get some help from the experts here!

    Cheers,
    Mike

  2. #2
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    Sounds like standard valve/lifter ticking. Might need to be adjusted as most people never adjust valves.

    The vibration could be about anything. Nicked prop, rudder play to 1 side while turned, prop shaft bearing and/or seal, etc. list goes on and on.

    On the back side of the engine, between the rear seat and and rear of motor, there appears to be water around the bottom. Any idea where this is coming from? I would assume the prop shaft dip seal and if that is failing it could cause a little vibration and water in the bilge.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  3. #3
    Join Date
    Oct 2021
    Location
    Germany
    Posts
    4

    Default

    Many thanks!
    Water in the bilge was identified caused by a lose strainer bowl.

    Starboard manifold has a small leakage in the manifold body and will be fixed by the Dealer

    Has the bilge to be completely dry or world you call a few drops normal?

  4. #4
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    None of my boats have ever been "completely" dry.

    I would see if the dealer will check and adjust the valve lash.

    Maintenance records available and/or being provided? Oil change (all 3)/Spark plugs/Cap and rotor/Wires/Impellers (cooling system and ballast) . Just standard maintenance things that may or may not need to be done. Would be nice to know so you aren't throwing money at it.

    Also make sure everything else works, ballast, stereo, bilge pump, etc.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  5. #5
    Join Date
    Oct 2021
    Location
    Germany
    Posts
    4

    Default

    Boat was originally sold by the same dealer and he also did every single service since 2012.
    Full Service and winterization will also be done before handover

    All other components you mentioned work as they supposed to

  6. #6
    Join Date
    Aug 2009
    Location
    Richfield, WI
    Posts
    390

    Default

    That noise is the fuel injectors firing..In combination with normal valve train noise.
    2021 Moomba Max

  7. #7
    Join Date
    Oct 2021
    Location
    Germany
    Posts
    4

    Default

    Thanks a lot guys for your quick responses and support!
    just signed the deal

  8. #8
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,254

    Default

    Awesome! Congrats on the new boat. Let's see some photos before they throw the cover on it.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •