Page 1 of 4 123 ... LastLast
Results 1 to 10 of 37
  1. #1
    Join Date
    May 2017
    Posts
    171

    Default 2015 Mojo Plate removal

    I have all the bolts and screws out, does anybody know of a good way to get that plate removed from the back of the boat? I tried a heat gun to heat up the epoxy and a hammer and that didn’t make it budge. Any ideas?
    2015 Mojo Surf

  2. #2
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,360

    Default

    Quote Originally Posted by SorryCharlie View Post
    I have all the bolts and screws out, does anybody know of a good way to get that plate removed from the back of the boat? I tried a heat gun to heat up the epoxy and a hammer and that didn’t make it budge. Any ideas?
    What plate are you referring to? The trim plate?
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  3. #3
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    Quote Originally Posted by SorryCharlie View Post
    I have all the bolts and screws out, does anybody know of a good way to get that plate removed from the back of the boat? I tried a heat gun to heat up the epoxy and a hammer and that didn’t make it budge. Any ideas?
    Plate? Like the wake plate hinge?

    Debond spray, scoring the edges, the longer and more spray used the easier it comes off, use some small wood shims to help pry it off slowly after using the debond.

    https://marineformula.com/collections/marine-formula
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  4. #4
    Join Date
    May 2017
    Posts
    171

    Default

    Sorry, the surf plate, I think it’s auto flow? The big block of metal on the transom port and starboard. I’m installing Evolution tabs and want remove those plates.
    2015 Mojo Surf

  5. #5
    Join Date
    May 2017
    Posts
    171

    Default

    Quote Originally Posted by parrothd View Post
    Plate? Like the wake plate hinge?

    Debond spray, scoring the edges, the longer and more spray used the easier it comes off, use some small wood shims to help pry it off slowly after using the debond.

    https://marineformula.com/collections/marine-formula
    Stuffs pricey but looks like it’ll make the job easier, thanks.
    2015 Mojo Surf

  6. #6
    Join Date
    Sep 2017
    Posts
    232

    Default

    i would assume they are glued on with 3M 5200....i would get the debond for sure!
    2022 SA450
    2019 Mojo
    2017 Mondo - SOLD

  7. #7
    Join Date
    Aug 2011
    Posts
    2,522

    Default

    Quote Originally Posted by jcredible View Post
    i would assume they are glued on with 3M 5200....i would get the debond for sure!
    debond and soak it for a few days and wood shims otherwise you'll scratch/break the gel coat getting them off.

    Tap the shims in a little each time you use the debond, gotta go really really slow.
    Last edited by parrothd; 09-23-2021 at 04:25 PM.
    http://www.instgram.com/jlyons30
    2002 Moomba Mobius LSV - Sold
    2006 Moomba Mobius LSV - Sold
    2017 Moomba Craz - Enzos, Lead

  8. #8
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,360

    Default

    I take it you have manual flow tabs now? Or you jist upgrading the autoflow tabs?

    Couldn't you jist reuse the hinges if you had autoflow already?
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  9. #9
    Join Date
    May 2017
    Posts
    171

    Default

    Quote Originally Posted by Holdmybeer View Post
    I take it you have manual flow tabs now? Or you jist upgrading the autoflow tabs?

    Couldn't you jist reuse the hinges if you had autoflow already?
    Yes, it has the manual tabs and I want the plates next to the center plate like they make them now. I also want control in the cockpit.
    2015 Mojo Surf

  10. #10
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    1,360

    Default

    Quote Originally Posted by SorryCharlie View Post
    Yes, it has the manual tabs and I want the plates next to the center plate like they make them now. I also want control in the cockpit.
    I'm looking to do the same upgrade this winter.

    Any reason you went with Evolution over other? Price?
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •