Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Join Date
    Nov 2020
    Posts
    402

    Default

    Quote Originally Posted by russellsmojo View Post
    For real on the bow roller area! The SA just loves to get scuff marks around that area!


    Sent from my iPhone using Tapatalk
    For real! Mine is orange half the time and our gel there is white! Been thinking about one of those protectors that go around the bow eye but they’re hideous

    Any recs?


    Sent from my iPhone using Tapatalk

  2. #12
    Join Date
    Aug 2015
    Location
    Mn
    Posts
    705

    Default

    Do not pay 200$ for dealer install protection film. Get this:

    https://www.amazon.com/VViViD-Protec...93&sr=8-7&th=1

    Easy to cut to size and shape.

    ALso , to tell if its a scratch that needs repair vs a surface scuff that can be buffed, spray water, if it disappears u can buff it out, if it does not you will need gel coat work.
    2020 Supra SL 400
    2015 Moomba Mojo(Sold)
    2018 Yamaha Waverunner(Just to fool around)
    2018 F150 Lariat
    sport edition, 3.5lt ecoboost

  3. #13
    Join Date
    Dec 2015
    Location
    north texas
    Posts
    1,164

    Default

    Quote Originally Posted by eder10986 View Post
    For real! Mine is orange half the time and our gel there is white! Been thinking about one of those protectors that go around the bow eye but they’re hideous

    Any recs?


    Sent from my iPhone using Tapatalk
    I have thought about replacing the roller. Mine is 5 years old so probably doesn’t roll good and the rubber is probably broken down. The problem is I only think about it for about 30 seconds at the ramp


    Sent from my iPhone using Tapatalk
    2017 Supra SA

  4. #14

    Default

    Quote Originally Posted by russellsmojo View Post
    I have thought about replacing the roller. Mine is 5 years old so probably doesn’t roll good and the rubber is probably broken down. The problem is I only think about it for about 30 seconds at the ramp


    Sent from my iPhone using Tapatalk
    How would one get access to the part of the hull that the front roller makes contact with? In the water... nope. On the trailer? Nope. Is there a trick to getting under the front stop or the bunks to apply a film like that? (sorry, new to this stuff)

  5. #15
    Join Date
    May 2018
    Posts
    4,930

    Default

    Quote Originally Posted by CptAmerica View Post
    How would one get access to the part of the hull that the front roller makes contact with? In the water... nope. On the trailer? Nope. Is there a trick to getting under the front stop or the bunks to apply a film like that? (sorry, new to this stuff)
    If I wanted access to the bow eye area.

    1)Just load boat short of the bow roller
    2)you could do it in the water/dock. Bow eye is well above water line.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •