Results 1 to 10 of 35
Thread: Heater installation 2020 Mojo
-
09-06-2021, 11:52 AM #1Senior Member
- Join Date
- Jul 2021
- Posts
- 107
Heater installation 2020 Mojo
Since the end of summer is near us and my wife gets cold easily it’s time to install the heater.
I just ordered the kit https://www.bakesonline.com/heater-c...eater-kit.html
Now the challenge is going to be installation.
Im planning on mimicking the manufacturer set up including yawing hash switches.
Does anyone here have a cooling system diagram for the raptor engine? Or if you have a heater would you mind taking pictures to show where the supply and return is?
Also which switch on the dash is dedicated to the heater?
Sent from my iPhone using Tapatalk
-
09-07-2021, 12:51 AM #2
I have a 2020 with the factory heater. I will take some pics and send them off to you.
2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
09-07-2021, 08:15 AM #3
When you open the engine hatch the heater lines will be on the back right if you're standing in the boat. There will be a little loop of heater hose, you'll remove that and then run your supply and return.
Screenshot 2021-09-07 071441.jpg
You will also need a circulation pump for the raptor motor:
https://www.wakemakers.com/heater-cr...rofit-kit.html2020 Supra SA
-
09-07-2021, 09:34 AM #4Senior Member
- Join Date
- Jul 2021
- Posts
- 107
-
09-07-2021, 09:36 AM #5Senior Member
- Join Date
- Jul 2021
- Posts
- 107
-
09-07-2021, 10:17 AM #6
The raptor motors don't have enough coolant flow through that circuit at low rpm without the pump, all of the factory installs have a circ pump.
Without it your heater will only be useful at higher rpm2020 Supra SA
-
09-12-2021, 09:05 PM #7
My pumps toast and I can’t get one they’re all on back order or out of stock
Sent from my iPhone using Tapatalk
-
09-12-2021, 10:01 PM #8Senior Member
- Join Date
- Jul 2021
- Posts
- 107
I just got a quote from Bakes.com. For the pump, 2 fittings and 1 harness…$405. That’s on top of $550 for the kit.
If it wasn’t for my wife I would choose cold. Lol
Sent from my iPhone using Tapatalk
-
09-13-2021, 07:25 AM #9
-
09-13-2021, 07:41 AM #10Senior Member
- Join Date
- Jul 2021
- Posts
- 107
I should have it all this Wednesday so this will be a busy weekend. Lol
What’s really funny is that if you flip the tag for ACC switch is actually labeled Heater.
Stay tuned for pics and install video.
Sent from my iPhone using Tapatalk