Results 1 to 5 of 5
Thread: 2019 max seat issues
-
09-04-2021, 09:40 PM #1Junior Member
- Join Date
- Jun 2021
- Posts
- 16
2019 max seat issues
Is anyone else having issues with the seat cushions tearing the vinyl along the piping? Boat has 120hrs and always stored inside usually only have 2-5 people in it. The rest of the boat is good the seats not so much. Our 12 year old supreme that we replaced with this boat had 500 hrs and the interior looked like new.
-
09-04-2021, 10:19 PM #2
Should be under warranty for that fix.
Sent from my SM-G781V using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
09-04-2021, 10:41 PM #3
The piping on both corner cushions is coming off on my 2021 Mojo but no other issues.
2020 Moomba Mojo
2008 Mastercraft Prostar 197 40th Anniversary
Owner Ness Lake Watersports
Wakemakers “Exact Fit” Bags + Lead = 4,700 ballast
Audio by Wetsounds, MTX, JL Audio, Clarion
15 X 13.00 ACME prop
-
09-04-2021, 10:58 PM #4Junior Member
- Join Date
- Jun 2021
- Posts
- 16
Second owner here bought it this spring with 30 hrs on it so we will see what the dealer says. It should be double stitched along the piping not sure was it isn’t from factory.
-
09-05-2021, 08:31 AM #5
I have not had issues with the piping, but I had the stitching on a front seat rip and the foam looked like it was humped up underneath the vinyl. I sent a pic to my dealer and they sent me a whole new seat. I would have been fine with it just being repaired. It should be covered by warranty as long as it is transferable.
Sent from my iPhone using Tapatalk
2018 Moomba Craz
6.2L Raptor 400
6 Pump Ballast, Autowake 2.0, Flow 2.0 Surf System
OJ 15x13 Wake Prop
Digital Cruise Pro 3 (paddle wheel)
Wetsounds Rev 10's
2005 Supra Launch 22SSV - Sold