So I had put boat out last weekend and everything ran great. Since then, I have changed the port side wakeplate actuator and I drained the coolant and refilled to do the 2 year recommended replacement. I got to start the boat to let the coolant cycle through and add as needed and the boat will not start. I have to think this is completely unrelated to the actuator and coolant.
Here are my symptoms. Turn the key to run. Dash lights up, wakeplates engage, fuel pump kicks on and I can hear the heater pump trying to cycle antifreeze also. I checked all the fuses on top of the engine for the starter and they are good. However, when you turn the key to start, they relay does not click. The boat does not even try to turn over. The relay for the main power and the fuel pump both click when I turn the key to run. Any ideas????


Sent from my iPhone using Tapatalk