Results 61 to 70 of 124
Thread: 2022 Software
-
08-28-2021, 11:23 AM #61
Just go to your dealer and explain you installed a bootleg copy and now you want to know what it does.
1998 Mobius
310 HP PCM
SOLD
-
08-28-2021, 07:40 PM #62
-
08-31-2021, 10:28 AM #63Senior Member
- Join Date
- Sep 2017
- Posts
- 232
Anyone getting the following error while trying to engage Cruise on the new 2022 Software? It pops up and the boat won't get up to speed. You disable cruise, pop it back on....then it seems to work.
It seems to happen when I don't ease into pulling up a rider more frequently. I have a paddlewheel setup.
Thanks!
-
09-01-2021, 04:56 PM #64Senior Member
- Join Date
- Apr 2002
- Posts
- 195
hey guys! Its me again, Matt Brown. I have been trying to keep up with this chain and I have noticed there are lots of confusion about some of the new 2022 Moomba software features. So to try and help, I will go back to my old "tips of the day" where hopefully I can give you guys some info in easily digestible sections. So, without further ado....
Random tips of the day (2022 Moomba software) - paddlewheel fault
In the post above, you will notice one of the new features is a new "paddlewheel fault". We call it that on our development pages in the software. As you can see, when this "fault" occurs, it shows up on the screen as a small icon on the bottom right that reads "Cruise disabled - No vessel speed". The reason we added this logic is because for 2022 ZeroOff is standard and the paddlewheel is optional. In the past, if you had ZeroOff then you still had paddlewheel as a backup if you lost GPS. However, without paddlewheel backup, we had to add logic in case you lost GPS. While very unlikely, if you did lose vessel speed and cruise was engaged, it might be possible for the engine to increase rpm to try and maintain a vessel speed that was not present. So, the way the new logic works is it is constantly monitoring rpm and vessel speed. The default settings are if the engine is on, and the RPM is going over 1800 and if the system sees a 0.0 speed for at least 50 milliseconds, then the system will turn off cruise, give you the popup and reduce RPM to 80% of the RPM that the engine is currently running. However, there are a few times when you might need to adjust these settings. For example, if you are running paddlewheel only, then it might be possible for the system to "lose signal" for 50 ms. That is a very fast period. If you have this popup, you might want to go into the development pages and adjust that setting from 50ms to 150 ms or maybe longer. Every paddlewheel is different but if you have to adjust it higher than 250ms (1/4 of a second), then you might need to replace your paddlewheel. Another situation that might not need adjustment, but rather education is if you turn on engine and immediately try to accelerate. The GPS puck is powered from the ignition circuit. So, it takes about 30 seconds from the time you turn key on for the GPS puck to lock in on speed. If you turn key on and immediately accelerate, it is possible that the system might not lock in GPS speed and in that case, it would not engage cruise because it sees 0.0. In that case, watching the screen can show you that. If you accelerate and the speed shows 0.0, then you are definitely going to get that popup. In that case, you might just need to wait a few seconds longer before you accelerate. The truth is you wouldn't want cruise to engage like that anyways. Not sure if you have ever seen this, but we have had that feedback before of the boat accelerates, then cruise takes over and the engine slows way down. That can happen for the same reason. If you accelerate with no speed, then speed kicks in, it can make the cruise feel very awkward for a little bit.
Ok, hope that helps. If you are not familiar with the "development pages", then ask your dealer for help. They can adjust these settings for you if necessary. In the next few days I will try to write up similar tips for "Leak detection" and "Autofill". These seem to be very confusing for some people but I think once you guys understand it, you will love these new features. Hope you guys and girls are having a great summer!!
-
09-01-2021, 05:20 PM #652021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
09-01-2021, 05:24 PM #66Senior Member
- Join Date
- Aug 2017
- Posts
- 143
2022 Software Dealer Install
Hi All,
Are we to the point where dealers are ready / willing to install the 2022 Software on 2021 Boats? Green Light?
Getting conflicting info.. . I don't want to do it myself (for all the reasons mentioned in previous posts).. but also don't want to drive it all the way to the dealer to get the "blank stare" ...
..It's getting closer to the end of the season and I need to decide if we are going to wait until the end of the year.. or try to get it done now and test it out before the end of the season (which I really want to do).
Been having issues with my tabs not resetting, or otherwise somehow "losing" settings, even if I haven't changed anything. Hoping to have that looked at and get the software installed at the same time (who knows, maybe it will help).
Thanks in advance.2021 Mojo
2018 MAX - sold - 250 hours, absolute awesome boat.
-
09-01-2021, 06:30 PM #67Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Call the dealer, tell them moomba has a new software firmware for your boat and you would like them to contact skiers choice and download the new firmware. Ask them to let you know when they have downloaded it and you will bring the boat in to be updated. I just do my own, if it goes wrong play dumb..lol..It really is plug it in, turn boat off and on my boat 4inch screen I press and hold the center button to update.http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
09-01-2021, 06:58 PM #68Senior Member
- Join Date
- Sep 2017
- Posts
- 232
-
09-01-2021, 09:02 PM #69
Dealers “not in the know” or “pretending not to know” b/c they do not have time?
I heard about it reading a Wake9 post about a ballast video he is releasing about weight placement.
The Wake9 boat has been running the new software on their 2021. Robert was telling people to contact their dealers. I know he would not post this unless he had the green light from SC.
SC people are on this thread.
Sent from my iPhone using Tapatalk2018 Supra SL400
-
09-01-2021, 10:08 PM #70