Makia sub

[vdubnick]

I believe you will find that the OEM tower amp is a Wet Sounds Syn-DX4 bridged to 2 chnls, so its at its capacity. Cant add additional speakers to it.

yeah you are right about the amp, its oversized too, 400w rms, vs the speaker at 300w rms

6ch is same with the sub, 600wrms at amp and 300 at speaker, room for 2 more 6.5's too, not sure where i would mount them.

amps have some room

[Holdmybeer]

The bow. Is where the 5th and 6th speaker go. But if you have the upgraded stereo with bow speakers already then not sure.

[MLA]

its oversized too, 400w rms, vs the speaker at 300w rms

Not at all too much wattage. 400 is a good spot to be. I run my demo's at 525W rms. Wattage above the rated RMS means the speaker reaches its potential with the amp running at a more conservative setting.

The woofer should be the Revo-10HP which is rated at 400W/800W RMS/PEAK. It will handle the the bridged 600W all day long.

[vdubnick]

Not at all too much wattage. 400 is a good spot to be. I run my demo's at 525W rms. Wattage above the rated RMS means the speaker reaches its potential with the amp running at a more conservative setting.

The woofer should be the Revo-10HP which is rated at 400W/800W RMS/PEAK. It will handle the the bridged 600W all day long.

valid points... ocd in me just likes matching numbers.

i still need to get it on the water before i go adding anything anyways...