Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    966

    Default

    3 pump system.
    Front/mid pump is on port side behind the rear wall of the rear locker. 2 Phillips screws at the top and 4 screws on the angle pieces on the floor.

    I think the bottom one is the front/mid, but you will need to confirm.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  2. #22
    Join Date
    Jun 2020
    Location
    Utah
    Posts
    176

    Default

    Quote Originally Posted by Holdmybeer View Post
    3 pump system.
    Front/mid pump is on port side behind the rear wall of the rear locker. 2 Phillips screws at the top and 4 screws on the angle pieces on the floor.

    I think the bottom one is the front/mid, but you will need to confirm.
    Nope... The 2016 has the pumps side by side. the one next to the engine is the front/mid one. The way it is mounted requires you to fully remove the pump to change the impeller (at least it was on mine), since the impeller cover is facing the engine compartment.


    2016 Moomba Mojo Surf Edition
    2000 Sharpe Houseboat 70x16 (Lives at Lake Powell)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •