Results 1 to 6 of 6
Thread: Removing board racks
-
08-09-2021, 04:04 PM #1Member
- Join Date
- Mar 2021
- Posts
- 68
Removing board racks
Rack 1.jpg
Trying to post a pic... I have a 2019 mondo with the standard racks. Our water is up this year and in order to take the boat out of the water at the end of the season i have to go under a very low bridge. i may have to take my racks off. Can you anyone tell me what "allen's" to take off from the pick? What is the proper way to remove these racks.
-
08-09-2021, 04:39 PM #2
This is the screw that removes the rack. You should have an allen wrench with a big black handle.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
08-10-2021, 09:24 AM #3Member
- Join Date
- Mar 2021
- Posts
- 68
thank you!! Thats what i kind of thought but wanted to make sure. Appreciate it!!
-
08-10-2021, 11:13 AM #4
Don't drop it in the water!
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
08-23-2022, 12:08 PM #5Junior Member
- Join Date
- Sep 2018
- Posts
- 14
Thanks Scott! I was wondering what that wrench was for.
Do you happen to know if removal of the swivel for the Roswell racks is the same?
Sent from my iPhone using Tapatalk
-
08-23-2022, 12:30 PM #6