2006 Moomba Mobius LSV Starter

[hgvandy]

I am in a bind. I am almost positive my starter is bad. Checked battery and connections. Everything works, but won’t turn over. What starter do I need. I have asked multiple online sites that sell marine starters with no reply. Need to get it going before vacation this weekend.
Thank you!!!

[Holdmybeer]

Bottom mount? Assault 325? Monson 310?

Indmar Part# 571006 - this is for both Bakes has it in stock $200

[hgvandy]

It's Assault 325. Didn't look like a bottom mount. Here is a pic.Boat1.jpg
Boat2.jpg

[Holdmybeer]

Yeah, that is bottom mount. The bolts come up through the bottom of the starter and into the engine block. Its on the port side, correct?

Its a GM 5.7L 350 based engine. Should be a starter for any 1988-1999 GM pickup truck would work. I'm sure the "marine" version is coated and made for coast guard approval, etc. but in a pitch your local auto parts shop would have it.

[hgvandy]

Changed out the starter and it still won’t start. I hear a click and nothing else. Battery is good and connections are clean. Any other ideas? I heard a fuse can blow, but I have no idea what those look like or where they are.

[hgvandy]

I found this fuse and pulled it out and it looks good. Open to suggestions.7A138D22-6ABA-4655-8984-B18BFAC00D26.jpg

[Holdmybeer]

Can you spin the engine by hand?
Put a breaker bar on 1 of the pulley bolts and try to spin it.

Teeth missing on the flywheel?
Starter relay?

[parrothd]

Can you spin the engine by hand?
Put a breaker bar on 1 of the pulley bolts and try to spin it.

Teeth missing on the flywheel?
Starter relay?

Dead battery..

[hgvandy]

Changed battery over and still just gives one click when I try and start it. Doesn’t turn over at all.
I have no idea how to spin the engine. I’ll start YouTubing. This one has me stumped.

[Holdmybeer]

If it is clicking then the ignition relay is pulling it but not the starter relay.

Check all the breakers and fuses.

Ignition relay pulls in starter relay and starter powers and spins. Something is not closing and passing power. Do you have a volt meter or test light?