August pics and vids

[jnr4817]

25293219-F469-47C1-B210-2500B7DE96FF.jpg

Great day. Water was a little chilly after the storms recently, but they didn’t stop us.

[Bigs28]

Had some friends come spend the weekend with us. Their kids had never waterboarded or wakesurfed. They had a blast.

[HFarr]

Had some friends come spend the weekend with us. Their kids had never waterboarded or wakesurfed. They had a blast.

Wow! That little man picked it up fast! Goof looking wave too. How fast was he going?

Sent from my SM-G781V using Tapatalk

[HFarr]

25293219-F469-47C1-B210-2500B7DE96FF.jpg

Great day. Water was a little chilly after the storms recently, but they didn’t stop us.

LOL. My PC would attach photos upside down too! Try using Tapatalk app on phone. Free version works great.

Sent from my SM-G781V using Tapatalk

[Bigs28]

Hfar that's my son surfing. He surfs and wakeboards all the time. All my friends are videos and i don't know how to post videos. They are the other 3 on the tube but they all rode the versa board first and then the older boy was able to surf with the rope and wakeskate. I put 500lbs off lead in the bow since everyone always sits in the back and run around 10.5 mph first and if they are getting pushed into back of the boat i speed up to about 11.5

[jnr4817]

Downloaded test post with pic.


Sent from my iPhone using Tapatalk

[HFarr]

Downloaded test post with pic.


Sent from my iPhone using Tapatalk

Good picture!

Sent from my SM-G781V using Tapatalk

[jnr4817]

She loves to surf. We are pleased with our Mojo wave.

[Schlanseay]

Wife got up


Sent from my iPhone using Tapatalk

[Mxmark4]

My quick lil project from tonight. Noticed my engine side covers bulging out with my new bags installed. So I had looked at ordering the wakemakers divider support bars but hesitated because 80 bucks seemed kinda pricey for c channel and bolts. So I decided to make my own. Got 1x1x1/8 in aluminum c channel from metal supermarket here in town. Of course they only had half of what I needed but for 20 bucks i took it. Then a trip to Ace for stainless hardware @25 bucks. Drilled out the channel, placed the supports where they didnt protrude onto anything critical and then marked and drilled divider. Bolted up and boom! One side down. Now just waiting for metal to finish other side. Buying is definitely the better deal. Will be within 20 dollars by the time its all done, and wakemakers powdercoats theirs for a stealthy look