Roswell Triton Racks

[Woody929]

Are Tritons safe for handmade boards or just compression molded?

Sent from my Note9 using Tapatalk

I haven’t tried with anything except my Phase5 boards, but they don’t put a ton of pressure on the boards. Almost like they are hugging them in place.


Sent from my iPhone using Tapatalk Pro

[RC_Hinojosa]

I haven’t tried with anything except my Phase5 boards, but they don’t put a ton of pressure on the boards. Almost like they are hugging them in place.


Sent from my iPhone using Tapatalk Pro

That's good to know. In the past, I kept boat boards in the racks and my Chaos (bamboo ringer) & P5 in the bimini pockets.



Sent from my Note9 using Tapatalk

[TXSurf4]

That's good to know. In the past, I kept boat boards in the racks and my Chaos (bamboo ringer) & P5 in the bimini pockets.



Sent from my Note9 using Tapatalk

We keep my wife's Chaos in the Triton rack with no adverse affects.

While they do create blind spots it really isn't a huge deal.

[loc82]

Will the triton racks be a direct swap for the s bend tower on a 16 Mojo?

[KnoxMojo]

Will the triton racks be a direct swap for the s bend tower on a 16 Mojo?

If it is the S bend, I don't think so as it was built my XTP. If it is a Roswell Aviator, it should mount up. See if you can upload a photo of your tower and mounting point.