Results 1 to 4 of 4
Thread: Indmar Sea Strainer
-
06-03-2021, 06:04 PM #1
Indmar Sea Strainer
My boat is in storage 45 min away so wonder if anyone can answer this question:
I have a 2015 Mondo I am looking to install the Indmar Sea strainer to make servicing easier. I just need to confirm that the boat would have a seacock on the raw water intake for the tanny/engine (I would think they would) so I don't need to pick up a shut off valve for flushing. Thanks in advance. B2015 Moomba Mondo surf
Auto flow surf 2.0
Nautic logic gps
Samson reverse arch
1100 fat sac.
-
06-03-2021, 06:32 PM #2Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 453
Can’t confirm for certain but yes on a 2016 mojo model. I would think this has to be std in order to isolate from flooding the engine compartment if you had hose or other problems.
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
06-04-2021, 06:05 AM #3
My 2015 Moomba Mondo has a raw water shutoff. They all should. Incase you have an issue with a hose you can shut it off and prevent sinking.
Sent from my iPhone using Tapatalk2015 Moomba Mondo Surf Edition
-
06-15-2021, 12:03 AM #4Junior Member
- Join Date
- Jul 2020
- Location
- Tin Top, TX
- Posts
- 24
Not sure about yours but my 2017 Craz has a shutoff valve for closing when using the flushing adapter.
Installed the kit myself, easy to start & run boat out of water.2017 Moomba Craz
Raptor 400
Surf Edition
2012 GMC Sierra 1500 SLT Z71
5.3L V8
Rough Country 3.5” Suspension Lift
Helwig Springs
1999 Moomba Outback (sold)
Gone but not forgotten.