Results 1 to 4 of 4
Thread: Question for Brian Raymond
-
07-07-2003, 10:15 AM #1Member
- Join Date
- Sep 2002
- Location
- Oregon
- Posts
- 33
Question for Brian Raymond
What is the normal Oil pressure operating range on the 2000 Indmar assult MPI in my Mob V. At idle it is just under 40 and from 1000 rpm on up it varies from around 40 to 50. Is this normal range or is the sending unit going bad.
-
07-09-2003, 10:53 PM #2Brian Raymond Guest
Oil press.
Sorry for the delayed response. The pressure numbers at the various rpm's are correct. These numbers will vary slightly due to gauge manufacturer and the font set up on the gauge. It appears that your sending unit and gauge are functioning properly. It has been through my experience, that a sending unit is either good or bad, there is usually no indication one is about to crap out. The most common issues are in the wiring or the gauge itself. GM has some specs. in the Indmar owners manual, you can actually run oil press. @4psi@idle, and 14psi@2000rpm. These, of course, are probably the mins. Brian Raymond
-
07-10-2003, 06:19 PM #3Member
- Join Date
- Sep 2002
- Location
- Oregon
- Posts
- 33
Thanks Brian
-
07-10-2003, 06:19 PM #4Member
- Join Date
- Sep 2002
- Location
- Oregon
- Posts
- 33
Thanks Brian
Similar Threads
-
Brian Raymond
By Brian Raymond in forum Boat OwnersReplies: 8Last Post: 10-23-2005, 10:30 PM -
tbi....brian raymond?
By DOCDRS in forum Service & RepairReplies: 0Last Post: 03-11-2004, 04:33 PM -
Brian Raymond
By Lpfeil in forum General ChatReplies: 9Last Post: 01-31-2004, 02:36 AM -
Brian Raymond?
By Bfrank in forum Service & RepairReplies: 8Last Post: 01-06-2004, 10:21 PM -
Brian Raymond
By dburroug in forum Service & RepairReplies: 1Last Post: 10-11-2003, 11:15 PM