Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    428

    Default Can anyone identify this?

    I meant to post this a long time ago, but forgot. I found this laying under the seat in the front passenger side compartment. It's definitely a divider or bulkhead of some sort, but for the life of me I cannot figure out where it went/goes. I discovered it after getting the boat home from the dealership. I called and they were not sure what I was talking about. I figured that I would be able to see where it fit, but no luck. Probably so simple or obvious I am overlooking it.

    Sent from my moto z4 using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds Rev 8's, 10's, & sub

  2. #2
    Join Date
    May 2010
    Location
    Salt Lake City, Utah
    Posts
    1,429

    Default

    Is this on a new boat that just came from the factory or did you have it in the shop for repairs?
    Scott
    2021 Craz
    2007 Mobius LSV
    1997 Sea Ray 190

  3. #3
    Join Date
    Sep 2020
    Location
    Lehi, UT
    Posts
    261

    Default

    Looks like a flux capacitor to me.
    2016 Starcraft Limited 1918 (sold)
    2021 MB Sports B52 Alpha (coming April 2021)
    2020 Toyota Tundra TRD Pro
    B-737 (Work Vehicle)

  4. #4
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    428

    Default

    It's on a 2021 Makai. Brand new. I was trying to make it fit somewhere the wet sounds amps or subwoofer is at. Thinking they took it off to mount them, but just can't seem to make it work out.
    And it doesn't have enough wiring on it to generate the needed 1.21 "jigawatts", so it can't be a flux capacitor.

    Sent from my moto z4 using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds Rev 8's, 10's, & sub

  5. #5
    Join Date
    Aug 2017
    Posts
    1,382

    Default

    Under helm.


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Jan 2018
    Location
    Lexington, KY
    Posts
    346

    Default

    I wonder if it's some template that they use at the factory to mark or cut something and they left it in your boat!
    2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead

  7. #7
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    428

    Default

    I don't think it's a template. It has the push rivets/pins in it like it's a divider panel or cover for something. I am going to look under the helm real good like dakota4ce mentioned. That's where the subwoofer box is mounted too. I am thinking maybe it had to come out for that. I looked there briefly before, but didn't see any place that the push pins looked like they would have mated up. Now I am wondering if it's mounted horizontally above my knees in the helm. Nothing appears to be missing that I remember.
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds Rev 8's, 10's, & sub

  8. #8
    Join Date
    Feb 2018
    Location
    Boating on Lake Martin, AL
    Posts
    1,136

    Default

    The slot looks like the same size as a DIN radio. The groove looks like it slides into another panel. Perhaps a faux/beauty wall under the helm where the back of the back of the radio is?
    2019 Moomba Max "MOOMBAE"
    Mods: Wakemakers upgrade + 500 lbs of lead
    2016 Yamaha AR192 - sold

  9. #9
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    428

    Default

    I'm gonna play with it some more this weekend and see. Anyone out there with another Moomba have anything similar anywhere on their boat. The helms on them are all pretty close to the same. 21 year model, but I bet 19 and up are almost identical.

    Sent from my moto z4 using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds Rev 8's, 10's, & sub

  10. #10
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    699

    Default

    The back of the helm is wide open on my '19 so I doubt it is from there. I had to access it to get to my USB to update my system so I spent a lot of time under there lol.
    2019 Makai - Raptor 450

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •