Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Join Date
    Aug 2020
    Location
    Mansfield, OH
    Posts
    8

    Default

    Thanks ! I was pulling towards the west marine epoxy system for that reason as I dig deeper through the info.

  2. #12
    Join Date
    Aug 2020
    Location
    Mansfield, OH
    Posts
    8

    Default

    It’s small and extremely busy on the weekends. I’ll have to check those out too . What’s deer creek and Caesar’s like ?

  3. #13
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    865

    Default

    Quote Originally Posted by bucky89 View Post
    It’s small and extremely busy on the weekends. I’ll have to check those out too . What’s deer creek and Caesar’s like ?
    Deer Creek is smaller than Alum but more laid back and there are several of us wake boats that stay away from each other while riding. Always the idiot pulling his kids on a tube way too fast trying to use our wake as a double up. But the morning and evening the lake turns to glass.

    Caesar's is much larger. Can get rougher than we like also. It is 1hr drive so we don't get there much, but try to pick a fair weather day so we know the water will be calm. It is usually getting dusk before we head to the dock on those days.
    2015 Moomba Mojo Surf Edition
    4,000lbs
    Manual Flow

  4. #14
    Join Date
    Aug 2020
    Location
    Mansfield, OH
    Posts
    8

    Default In service

    Moomba is back in service ! New through transom exhaust parts machined of 6061 and I welded the flanges on. The epoxy part was tricky but managed to fill the gaping hole that Iím sure the water split the fiberglass when it turned to ice over the winter. New exhaust flaps and ensured the 3m 5200 got the time and temperature it needed to set up. Thanks for all the advise ! My machinist friend has the program set to make this again if anyone needs some made . Cheers 🍻 Eric

  5. #15

    Default

    Anyone know where to get those flanges? Need a replacement for a cracked one.

  6. #16
    Join Date
    May 2009
    Location
    North End Lake Lanier GA
    Posts
    8,155

    Default

    Quote Originally Posted by Moombamobiusxlv View Post
    Anyone know where to get those flanges? Need a replacement for a cracked one.
    iBoats
    WestMarine
    Greatlakes Marine all sell them
    Malo <--- Means--Evil or Mean One. This explains a lot.
    2013 Mojo 2.5 Skylon Tower. Bestia < Beast >
    [COLOR="#696969"]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •