Results 1 to 4 of 4
-
05-30-2021, 10:46 AM #1Junior Member
- Join Date
- May 2021
- Posts
- 2
Replacing USB/Aux port - hole is now too big
OEM port used a 1.25” hole, but the new one fits a 7/8” hole. Any ideas on how to make it work, or do I just need to send the replacement back?
Sent from my iPhone using Tapatalk2018 Moomba Helix
-
05-30-2021, 11:25 AM #2
Easy way would be to swap it, but if you're feeling crafty, you could check Home Depot or Lowes for some desktop cable grommet plugs. Get a blank one that is 1.25" and drill a 7/8" hole in it. Something similar to this:
Screenshot_20210530-112447.jpg
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-30-2021, 11:58 AM #3Junior Member
- Join Date
- May 2021
- Posts
- 2
-
05-30-2021, 04:01 PM #4
Hey wait! Let me get my wife and let you repeat that!!
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub