Moomba Makai registration number placement

[cpropes2005]

What is your lift setup? I noticed the smaller pvc pipe next to the larger.

Sent from my moto z4 using Tapatalk

The smaller pvc are just some home made guide posts and the larger pvc covers the chain that is attached to my cable. The guide posts are actually galvanized pipe with a fitting that I attached to the lift frame with pvc over the top.


Sent from my iPhone using Tapatalk

[HFarr]

Ok. I see that now. Not a bad idea.

Sent from my moto z4 using Tapatalk

[HFarr]

I like that pin you have holding your fender on the boat too. Was that hard to install?

Sent from my moto z4 using Tapatalk

[cpropes2005]

A little nerve racking drilling the holes but otherwise a really simple install. I have three on each side of the boat. They are the phender pro system that you can get on Supra’s.


Sent from my iPhone using Tapatalk

[HFarr]

I like that. But yeah, I may have to spend a little more time hassling with ropes before I can build up the courage to drill holes in my not quite 2 month old boat!

Sent from my moto z4 using Tapatalk

[Cylee]

cpropes2005 - Where did you get the lettering? I like them more then the domed ones. Thanks

[eder10986]

cpropes2005 - Where did you get the lettering? I like them more then the domed ones. Thanks

Ugh. Likewise!!!


Sent from my iPhone using Tapatalk

[cpropes2005]

I got mine off Amazon.

Boat Registration Number Lettering Sport Flat Black Emblem 3" https://www.amazon.com/dp/B01IO24PSI...BJR0YHG54C6YTV

Link looks inactive now but they came from this company.

https://www.boatslettering.com/colle...ing-collection


Sent from my iPhone using Tapatalk

[Cylee]

cpropes2005 - Thanks

[HFarr]

Finally got my registration numbers in. Decided to go with black domed metal flake. Took some advise and split the decal and numbers with. The hron on the starboard side


Sent from my moto z4 using Tapatalk