Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Join Date
    Jun 2008
    Location
    Toronto, On Canada
    Posts
    82

    Default

    Quote Originally Posted by Bdtlvs View Post
    It fires up awesome and runs great all the way up to around 3800 rpm….no hesitation or anything….i don’t see any lights on anywhere at all.
    I got a new distributor cap and rotor coming today that I’ll install and see, the distributor cap had some pretty good black sut around all the terminals and on the rotor so I hope that’s the answer! Maybe cross firing?? I also ordered a new coil
    Any chance you remember the outcome of this issue?
    2006 LSV

  2. #12
    Join Date
    Mar 2022
    Posts
    14

    Default Help! 2006 lsv möbius... assault 325 won’t go over 3500 rpm

    Would love to hear the resolution as well! Almost like a cylinder or two wasn’t firing assuming ~600rpm per cylinder and assuming not in a limp mode (check for codes).


    Sent from my iPhone using Tapatalk

  3. #13
    Join Date
    May 2021
    Posts
    7

    Default

    So….finally took into the local shop….it was a combination of crank sensor and cam sensor. With both replaced the boat runs awesome!

  4. #14
    Join Date
    May 2021
    Posts
    7

    Default

    Crank sensor and cam sensor. The boat runs awesome now…$900 later to the shop but it’s all good….I’m just glad she’s running right!

  5. #15
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,259

    Default

    Thank you for providing the solution
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •