Results 1 to 5 of 5
  1. #1
    Join Date
    May 2021
    Posts
    8

    Default Moomba Craz Ballast Issue

    I have the G6 ballast pump system on my boat and realized one of my front two pumps was not working. Checked the fuses and both of them were blown, so I replaced them both and they immediately blew again. Where should I start in diagnosing the issue?


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by Cfoosh11 View Post
    I have the G6 ballast pump system on my boat and realized one of my front two pumps was not working. Checked the fuses and both of them were blown, so I replaced them both and they immediately blew again. Where should I start in diagnosing the issue?


    Sent from my iPhone using Tapatalk
    Call Brandon and send him an invoice

    Just kidding...have you tried tripping and resetting the breakers?

    Sent from my SM-N960U using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  3. #3
    Join Date
    May 2021
    Posts
    8

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    Call Brandon and send him an invoice

    Just kidding...have you tried tripping and resetting the breakers?

    Sent from my SM-N960U using Tapatalk
    Ha, I already texted him! I have not. Are they in that same area as the fuses?


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    Jan 2017
    Location
    Katy, TX
    Posts
    1,678

    Default

    Quote Originally Posted by Cfoosh11 View Post
    Ha, I already texted him! I have not. Are they in that same area as the fuses?


    Sent from my iPhone using Tapatalk
    There is one near the battery switch and the other is on the firewall in the engine compartment.

    Sent from my SM-N960U using Tapatalk
    2017 Moomba Craz Surf Edition
    Flow 2.0 Surf System w/ AutoWake™
    5,600 Lbs Ballast - Enzos + Lead + Sumo
    Wet Sounds REV10s + REVO12-XXX

  5. #5
    Join Date
    May 2021
    Posts
    8

    Default

    Quote Originally Posted by RC_Hinojosa View Post
    There is one near the battery switch and the other is on the firewall in the engine compartment.

    Sent from my SM-N960U using Tapatalk
    I will give that a try in the morning.


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •