Results 1 to 5 of 5
Thread: Wake Plate
-
04-16-2007, 07:24 PM #1Senior Member
- Join Date
- Feb 2007
- Location
- Orange County, CA
- Posts
- 213
Wake Plate
This may be a dumb question but should my wake plate be moving to the "up position" after I have it completely down? This happens when I am approching full speed...
-
04-16-2007, 07:31 PM #2Member
- Join Date
- Oct 2005
- Posts
- 80
I wouldnt think so. Maybe it is low in fluid and going up when all that water pressure is hitting it under speed.
________
Yamaha DS7Last edited by superman; 01-24-2011 at 01:42 PM.
-
04-16-2007, 07:51 PM #3
Re: Wake Plate
Originally Posted by Pike
I did that to.
-
04-16-2007, 10:40 PM #4Senior Member
- Join Date
- Oct 2005
- Posts
- 199
Either low in fluid or you have a leak. Mine did that and it had a leak on the fitting to one of the pistons. Check your bilge for tranny fluid.
-
04-16-2007, 11:57 PM #5
Check for leaks first. If no leaks, your pump is not working right. There is a "plunger" type piece in the pump that might not be sealing right.
Similar Threads
-
Wake plate for LS
By mobyatBelews in forum General ChatReplies: 9Last Post: 02-28-2009, 10:58 AM -
Wake plate help!
By lift yer skirt in forum General ChatReplies: 2Last Post: 06-11-2007, 12:06 AM -
Wake plate
By clark in forum Wakeboarding | WakeskatingReplies: 2Last Post: 01-27-2005, 10:51 PM -
Wake Plate
By latchkey in forum Wakeboarding | WakeskatingReplies: 10Last Post: 06-11-2004, 11:50 PM -
wake plate
By 55ChevyBrad in forum General ChatReplies: 4Last Post: 11-08-2003, 02:57 AM