Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Join Date
    Apr 2021
    Posts
    5

    Default Where to stow my anchor - 2018 Mojo

    I am a new Moomba Mojo owner.. looking for some tips on where to stow stuff and also cooler ideas.. where to stow on the boat! Help a sister out!!

  2. #2
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    785

    Default

    This is what I did on my 17 mojo. 3/4 hdpe cut to length to sit on top of the docking light housing and then 1 stainless screw in each edge, as you can see in these photos. Bomber strong and really made good use of that space





    Sent from my iPhone using Tapatalk
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  3. #3
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    221

    Default

    This is genius. Good job and.......I'm stealing it
    2015 Moomba Mojo Surf Edition

    1100's in rear
    1000lb lead (500lb under each rear seat)
    Manual wake tabs
    Wet Sound Rev 8 swivels

  4. #4
    Join Date
    May 2020
    Location
    Nashville
    Posts
    137

    Default

    This great. I don’t have docking lights. Could this still be done? I’ve never thought of this, until this post so haven’t paid attention to the space.

    Great use of the space.
    2018 Moomba MOJO
    4100lbs. ENZO's, Center Tank, IBS
    480lbs. Pop-Products Steel Ballast Bags
    Raptor 400
    Surf Prop: OJ 945
    2019 Ford F150 FX4
    5.0L V8

  5. #5
    Join Date
    Jun 2009
    Location
    South West Colorado
    Posts
    785

    Default

    You could just spend a bit more time and create a bit more shape in the front of the shelf, where it contacts the carpeted inside of the bow hull. It could definitely be done without having to sit on the docking lights.


    Sent from my iPhone using Tapatalk
    '08 Mobius LSV- SOLD!
    2017 Mojo Pro

  6. #6
    Join Date
    Jan 2018
    Location
    Lexington, KY
    Posts
    342

    Default

    I had NO CLUE that Mojo's opened at the bow seat! Shit, does my Craz?!
    2018 Moomba Craz | Autowake 2.0, Zero-Off, G6 Pumps | Captain Blue/Dark Graphite/Silver Flake | Enzos + Lead

  7. #7

    Default

    I am totally doing this too. I hated the waste of space up there with the ballast sack. This is absolutely perfect!

  8. #8
    Join Date
    Apr 2021
    Posts
    5

    Default

    That is fantastic! Love it! I will do that! Any genius ideas for coolers?? I am looking for that as well! thanks again!

  9. #9
    Join Date
    Jan 2021
    Location
    Columbus, Ohio
    Posts
    221

    Default

    Rocking the Yeti M30 bag this year. Have been using a small hard cooler or relying on the cool/glove box from my old I/O. I found out quickly that having to move seats to get a cold one is annoying for the person sitting in the seat.

    The M30 fits behind the drivers seat since I don't have a backrest on that bench like others. I could also throw something under the filler cushion and it would be out of the way.
    2015 Moomba Mojo Surf Edition

    1100's in rear
    1000lb lead (500lb under each rear seat)
    Manual wake tabs
    Wet Sound Rev 8 swivels

  10. #10

    Default

    We just use a cooler bag under the filler cushion. Nobody likes using the bow as bench seating anyway. Alternately, we slip it under the cockpit by the driver's seat. Lots of space there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •