Results 11 to 17 of 17
Thread: My 2004 Mobius LSV
-
05-02-2021, 10:59 PM #11Junior Member
- Join Date
- Dec 2020
- Location
- Victoria BC Canada
- Posts
- 14
-
05-19-2021, 08:40 AM #12Junior Member
- Join Date
- Nov 2019
- Posts
- 9
Chris...did the 910 ballast bags fit with the stock input output hoses or did you get a new pump. I’ve got a Mobius but bags I ordered have top plugs and existing are lower rear to fit the short hoses. Thanks.
-
05-23-2021, 06:48 PM #13
Our 04 Moomba Mobius LSV was our first wakeboard boat...had a lot of great memories and started surfing that boat back in ~2009.
We put the Moomba decals on it the last year. Sold it in 2015 and regretted it everyday until we bought our 21 Max this year..
You have a great boat!
Sent from my iPad using Tapatalk2021 Moomba Max
-
05-25-2021, 12:48 PM #14Junior Member
- Join Date
- Dec 2020
- Location
- Victoria BC Canada
- Posts
- 14
The Wakemakers ones I bought were plug and play with the original 3/4" lines. Mine came with 2 lower rear plugs as well as front and and a top plug. I have the fill & drain on the rear lowers, and I bought a vent kit that attaches to the top to vent any air that finds its way into the bags, or if they get over filled it will allow and escape path for the water.
This setup works fine, but my stock Gravity III pump takes a while to fill the bags. Typically I turn on the pump as soon as I leave the dock and let fill while I get everything set up. Let me know if you need pics or anything.2004 - Mobius LSV
910lb rear sacks, 500lb bow bag, big pumps, surf pipe, & surf gate
-
05-25-2021, 12:49 PM #15Junior Member
- Join Date
- Dec 2020
- Location
- Victoria BC Canada
- Posts
- 14
-
05-31-2021, 11:59 AM #16Junior Member
- Join Date
- Dec 2020
- Location
- Victoria BC Canada
- Posts
- 14
I caved to public pressure and moved the speaker back under the tower. (And it looks better)
Last edited by Chris224; 05-31-2021 at 12:03 PM.
2004 - Mobius LSV
910lb rear sacks, 500lb bow bag, big pumps, surf pipe, & surf gate
-
07-01-2021, 03:30 PM #17Junior Member
- Join Date
- Nov 2019
- Posts
- 9
If you have pics that would be great. Trying to figure what adaptors to extend hoses and unsure how exactly to measure diameter. Thanks.