My rev 8 speakers don’t have rgb lighting but just old led strips and they aren’t working. I ran rgb wire up my wakeboard tower only to find out the cans on the speakers have a wire harness and no pass through hole I could run my wires through. The harness ABOVE the can has black and red audio cable along with small white/blue/green/yellow wires. I’m wondering if I could splice into those 4 colors and just run my red rgb line into the yellow and match the other 3 to their respective colors. The same wires are in the can below the harness plug. I’m just trying to avoid drilling a hole somewhere. I will probably quit the project before having it not look factory finished. . They will all be controlled by XKGlow 2 channel light controller.

2008 Moomba Mobius LSV