Results 1 to 1 of 1
Thread: Running RGB Wire
-
03-21-2021, 07:38 PM #1Junior Member
- Join Date
- Dec 2020
- Location
- North Texas
- Posts
- 20
Running RGB Wire
My rev 8 speakers don’t have rgb lighting but just old led strips and they aren’t working. I ran rgb wire up my wakeboard tower only to find out the cans on the speakers have a wire harness and no pass through hole I could run my wires through. The harness ABOVE the can has black and red audio cable along with small white/blue/green/yellow wires. I’m wondering if I could splice into those 4 colors and just run my red rgb line into the yellow and match the other 3 to their respective colors. The same wires are in the can below the harness plug. I’m just trying to avoid drilling a hole somewhere. I will probably quit the project before having it not look factory finished. . They will all be controlled by XKGlow 2 channel light controller.
2008 Moomba Mobius LSV2008 Moomba Mobius LSV Gravity Games Edition