Results 1 to 10 of 10
Thread: Mission Titan boat fender
-
03-14-2021, 01:52 PM #1
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
Mission Titan boat fender
Just showed up, should get the job done.
3-4 minutes to fill
3-4 minutes to deflate and stow.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-15-2021, 09:59 AM #2
Senior Member
- Join Date
- Dec 2020
- Location
- Boone NC
- Posts
- 334
Is this a nylon material?
How thick is it?
Looks super nice, comparing it to the lets tie up big bertha balls I just got I'm not sure which would do better
If its a thick nylon I might give it the edge, the lTU balls are a thick rubber. Im not sure how well they will hold up but I could see one popping with any sharp object.Josh
2021 Mojo, Sold 7/15/22
2023 Supreme S240, on order
-
03-15-2021, 10:19 AM #3
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
Mission Titan boat fender
It feels like lightweight ballast bag material. Fairly thin woven material with heavy vinyl coating.
It will be perfect for boat to boat tie ups, I would not use against a dock with any sharp wood or steel as it would puncture.
Only supposed to inflate to 1 psi.
Sent from my iPhone using TapatalkLast edited by larry_arizona; 03-15-2021 at 10:23 AM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-16-2021, 04:06 PM #4
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
I measured the material thickness at 24 mil.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-17-2021, 09:47 AM #5
Senior Member
- Join Date
- Aug 2020
- Location
- Middle Tennessee
- Posts
- 736
Should be fun to smack someone off the swim platform with too
2020 Supra SA
-
03-17-2021, 09:49 AM #6
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
My 18yo smart ass son WILL know what this is like!!! Rest Assured
Originally Posted by SONIC
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-17-2021, 09:55 AM #7
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
HO sports just came out with same thing for $100 less than mission titan.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-17-2021, 09:56 AM #8
Senior Member
- Join Date
- Aug 2020
- Location
- Middle Tennessee
- Posts
- 736
I'm fairly certain I would spend a large amount of time just standing in the middle of the boat spinning in circles "inadvertently" knocking people over while trying to inflate that thing.
Seems about right, mission first to the game but always pricey2020 Supra SA
-
03-17-2021, 09:59 AM #9
Senior Member
- Join Date
- May 2018
- Posts
- 4,930
Mission Titan boat fender
My plan is to use the phender pros to attach to the titan and boat, throw it overboard and then inflate it.
One of the sandbars we frequent can get busy, I will inflate this every time when anchored because most people use shitty anchors, then don’t pay attention and drift towards me. So purely a defensive measure. I always try to anchor up wind to prevent this, but someone always goes farther up wind and then acts surprised when they are 2 feet from my boat as I jump in and push their boat back .
Sent from my iPhone using TapatalkLast edited by larry_arizona; 03-17-2021 at 10:02 AM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-17-2021, 11:10 AM #10
Senior Member
- Join Date
- Feb 2017
- Location
- Colorado
- Posts
- 255
Funny, I just ordered one yesterday, waiting on it to show up this week. I figured it would be perfect at the houseboat when we are doubling or tripling up off the back.
https://www.hodgesmarine.com/fatm300...pe--black.html
fatm3001-black-2.jpg
Reply With Quote