Fresh Air Exhaust Group Buy (FAE group buy) Anyone Interested?

[KnoxMojo]

Interesting on the Mojo design from FAE. When I bought the FAE in 2018 I received just the single arm (no brace) one for my 2016 Mojo. I would much rather have a brace as well.

My Mojo was a 15, not sure if it was any different on the transom or not.

[flienlow]

Oh, I can assure you the transom is more than an inch thick! .

You sure about that?

[KnoxMojo]

You sure about that?

Guess I'm wrong, happens plenty. Wonder if it's different thickness in other areas? Or that's all that's needed. Never really put much thought into it. Is that for just Moomba or Supra as well?

[flienlow]

Guess I'm wrong, happens plenty. Wonder if it's different thickness in other areas? Or that's all that's needed. Never really put much thought into it. Is that for just Moomba or Supra as well?

I was working on my ballast venting. I was able to see light through the painted Gunwale. These boat are not as thick as previous ones I have owned. I would like to hope its higher performing materials as opposed to cost savings.

[flienlow]

I reinstalled my spare exhaust last night. The new stiffener block provided by FAE did not fit. I had to cut it down on the table saw in order for it to fit. This was disappointing, but easily fixed for me. I was also able to do this job myself. I aligned exhaust with hold and the new stiffener block held it in place. I then sprayed glass clean in the exhaust bpile for lubrication. I then applied the god forsaken 5200 and the pipe slid right in. The stiffener block has nut plates attached so you simply install screws and then you are all but done.

[jcredible]

I am curious if others have better success with the new FAE install setup(thicker flange\weld and stiffener block). I am probably selling my recently warrantied pipe, but if it doesn't sell, I might look for field experience if the new version has better luck. If it hasn't sold I will install it in the fall...i keep my boat in a slip and worry about leaving it with a slow leaking cracked weld on the FAE without knowing.

It does have a noticeable difference on sound in the boat though! It appeared to give me problems after a long tubing session with the kids...so curious if anyone else has noticed that!