Results 1 to 6 of 6
Thread: Extend Bow Bag Tubing
-
09-12-2020, 07:25 PM #1Senior Member
- Join Date
- May 2020
- Location
- Nashville
- Posts
- 225
Extend Bow Bag Tubing
I am need to extend by bow bag tubing. It is the drain side, I think, side with the AMP rack, under the glove box.
I am wanting to move the bag more towards the bow, approx 10-12 inches. I cannot pull anymore slack out of the current tubing. I am not sure how it terminates under the black vent cover.
Any help is appreciated.
2018 Moomba MOJO
4100lbs. ENZO's, Center Tank, IBS
780lbs. Lead Wake
Raptor 400
Surf Prop: OJ 945
2019 Ford F150 FX4
5.0L V8
-
09-13-2020, 09:13 AM #2
cut off metal band......heat the tubing (watch out to not heat right angle quick release) pull off quick release ...then take a male/ male coupler and extend it 12" and put the quick release back on. (of course band everything back together )
2022 MAX
Steamboat,CO
-
09-16-2020, 03:58 PM #3Senior Member
- Join Date
- May 2020
- Location
- Nashville
- Posts
- 225
I am not at home, but do we know the stock size for tubing and connectors. If memory serves, they appear to be 1 1/8", but I can't be sure. Won't be at boat for a few days.
2018 Moomba MOJO
4100lbs. ENZO's, Center Tank, IBS
780lbs. Lead Wake
Raptor 400
Surf Prop: OJ 945
2019 Ford F150 FX4
5.0L V8
-
09-16-2020, 09:29 PM #4
My max factory lines were all 1".
Sent from my SM-G960U1 using Tapatalk- Jason
2019 Moomba Max
-
09-17-2020, 07:36 AM #5
-
09-17-2020, 08:36 AM #6